مرحبا فى موقعنا

أجزاء محرك ساينو تراك

» أجزاء محرك ساينو تراك

Original SINOTRUK HOWO 28V Alternator Assembly VG1246090017 – High Output Engine Part Compatible with Sinotruk Spare Parts

الفئة والعلامات:
أجزاء محرك ساينو تراك

لماذا تختارنا?
جودة موثوقة: منتجاتنا تلبي أعلى معايير الصناعة.
توصيل سريع: شحن فعال لضمان الحد الأدنى من التوقف.
دعم الخبراء: المساعدة المهنية للتركيب واستكشاف الأخطاء وإصلاحها.

تحقيق
  • مواصفات
  • الخدمات
  • ملاحظات التثبيت
  • صفقة

Genuine-specification 28V alternator replacement for SINOTRUK HOWO trucks. OEM part number VG1246090017. Ideal as a durable engine spare part in commercial fleet maintenance.

SINOTRUK OEM-Compatible 28V Alternator – Model VG1246090017 | Engine Parts for HOWO Trucks

Maximize uptime and electrical reliability with this high-performance 28V alternator (الجزء لا. VG1246090017) , engineered specifically for SINOTRUK HOWO heavy-duty trucks. Designed as a direct-fit replacement for original equipment, this robust alternator delivers consistent charging power even under extreme operating conditions — making it an essential engine spare part for fleets across Africa, Asia, the Middle East, and Latin America.

Built with industrial-grade copper windings, sealed ball bearings, and a reinforced aluminum housing, ال VG1246090017 alternator ensures superior heat dissipation and long service life. It’s compatible with common HOWO models including HOWO A7, A5, T7H, and tipper variants, and integrates seamlessly with existing engine management systems.

This alternator is widely used in Sinotruk spare parts supply chains, trusted by workshops and transport operators for its durability, fast installation, and compatibility with both manual and automated transmission setups.

المواصفات الفنية:

  • رقم الجزء OEM: VG1246090017
  • Voltage Output: 28 Volts (Nominal)
  • Rated Current: 120أ (اساسي), up to 150A peak
  • Pulley Ratio: 2.0:1 (اساسي)
  • Rotation Direction: Clockwise (CW)
  • Mounting Type: Top-Bottom Adjustable Bracket (Direct OEM Fit)
  • Connector Type: 3-دبوس (B+, D+, إل)
  • منظم: Internal (Integrated IC Regulator)
  • Cooling Fan: Dual Internal Fans + Rear Ventilation
  • Phase Configuration: 3-Phase, Full-Wave Rectified
  • Operating Temperature: -40°C to +110°C
  • Dust/Water Protection: IP55 Rated (Protected against dust and water jets)
  • Compliance: GB/T 19058-2003, ISO 9001, E-Mark Optional
  • Fitment: SINOTRUK HOWO A5, A7, T7H, T5G, Cement Mixer, Dump Truck Models

Package Includes:
1 x 28V Alternator (VG1246090017), Installation Hardware Kit (Optional), Connection Diagram Sticker

Ships globally from warehouse hubs in Dubai, Istanbul, and Singapore. Used by major logistics companies in Nigeria, Kenya, Pakistan, Indonesia, and Peru.

1. نتعامل مع كل عميل كصديق لنا, التمسك بالمبدأ: مربح للجانبين ومزايا متبادلة ;
2. مجموعة متنوعة من الخيارات للمنتجات: جودة, الماركة, التعبئة والتغليف;
3. سنقوم بالرد عليك لاستفسارك في 24 ساعات.
4.المورد المهنية أجزاء ساينو تراك برفومانس
5. سنكون في الخدمة 24/24 ساعات في يوم العمل.
6. الحمار: سوف نقدم لك أفضل خدمة بعد البيع.

How to Install the VG1246090017 28V Alternator on SINOTRUK HOWO Trucks:

  1. Disconnect Battery: Always disconnect the negative terminal before working on electrical components.
  2. Remove Drive Belt Guard: Use socket wrenches to remove bolts securing the belt cover.
  3. Loosen Alternator Mounting Bolts: Loosen the top and bottom adjustment bolts using a 15–17mm wrench.
  4. Release Serpentine Belt Tension: Use a breaker bar or tensioner tool to reduce pressure and slide the belt off the pulley.
  5. Disconnect Wiring Harness: Unplug the main power cable (B+) and control connector (usually D+ and L terminals).
  6. Remove Old Alternator: Fully unscrew mounting brackets and carefully extract the old unit.
  7. Install New Alternator (VG1246090017): Position the new alternator into place and secure with original bolts.
  8. Reattach Serpentine Belt: Route the belt correctly over the pulley and adjust tension to manufacturer specs (~8–12mm deflection at midpoint).
  9. Reconnect Electrical Connectors: Plug in B+, D+, and L wires securely; ensure no loose connections.
  10. Test Charging System: Reconnect battery, start engine, and verify output voltage between 27.6V–28.8V at idle with load.

نموذج الاستفسار (ونحن سوف نعود اليكم في اسرع وقت ممكن)

اسم:
*
البريد الإلكتروني:
*
رسالة:

التحقق:
1 + 5 = ?

ربما يعجبك ايضا

  • أجزاء محرك ساينو تراك

    أجزاء محرك ساينو تراك
    قطع غيار محرك ساينو تراك هووا
    الشركة المصنعة لمحرك ساينو تراك
    تجار محركات ساينو تراك
    محرك ساينو تراك a7
    محرك ديزل ساينو تراك
    محرك ساينو تراك هووا

  • كابينة ساينو تراك

    كابينة ساينو تراك
    المقصورة ساينو تراك
    مقصورة ساينو تراك هووا
    أجزاء ساينو تراك جنوب أفريقيا
    أجزاء محرك ساينو تراك
    أجزاء ساينو تراك نيوزيلندي
    ساينو تراك الولايات المتحدة الأمريكية

  • أجزاء ساينو تراك

    أجزاء شاحنة جينان سينو متخصصة
    في تصدير قطع غيار الشاحنات الصينية
    info@sinotrukspareparts.com
    أضف:رقم 932 ، مركز قطع غيار QuanLi,شارع Lanxiang. ,تيان تشياو Distrbut,جينان ,الصين