Piezas originales de Sinotruk Howo | AZ9925522272 Núcleo de goma de varilla de empuje tipo V para Howo 60 Camión Minero & SITRAK C7H

1. TRATAMOS A CADA CLIENTE COMO NUESTRO AMIGO, PEGARSE AL PRINCIPIO: BENEFICIO MUTUO Y GANADOR ;
2. UNA VARIEDAD DE ELECCIÓN DE PRODUCTOS: CALIDAD, MARCA, EMBALAJE;
3. LE RESPONDEREMOS SU CONSULTA EN 24 HORAS.
4.Proveedor de piezas de rendimiento profesional SINOTRUCK
5. ESTAREMOS EN SERVICIO 24/24 HORAS DEL DÍA LABORAL.
6. CULO: LE OFRECEMOS EL MEJOR SERVICIO POSTVENTA.

1. Pressing Procedure: Never attempt to hammer the AZ9925522272 into the V-rod. Use a hydraulic press with a dedicated sleeve that matches the outer diameter of the core to ensure even pressure distribution.

2. Housing Inspection: Before installation, inspect the V-type thrust rod housing for ovality (warping). If the housing is stretched, a new core will work loose within weeks.

3. Lubrication Warning: Do not use petroleum-based grease on the rubber surface, as this will degrade the compound. If necessary, use a specialized rubber lubricant or a mild soap solution to ease the press-fit.

4. Final Torquing: Tighten the mounting bolts only when the truck is at its normal ride height (on the ground). Tightening while the axle is hanging on a jack will "pre-load" the rubber, leading to rapid tearing.