Genuine Sinotruk HOWO Rear Heat Shield VG2600111145 for WD615 Engine Exhaust Protection

1. TRATAMOS A CADA CLIENTE COMO NUESTRO AMIGO, PEGARSE AL PRINCIPIO: BENEFICIO MUTUO Y GANADOR ;
2. UNA VARIEDAD DE ELECCIÓN DE PRODUCTOS: CALIDAD, MARCA, EMBALAJE;
3. LE RESPONDEREMOS SU CONSULTA EN 24 HORAS.
4.Proveedor de piezas de rendimiento profesional SINOTRUCK
5. ESTAREMOS EN SERVICIO 24/24 HORAS DEL DÍA LABORAL.
6. CULO: LE OFRECEMOS EL MEJOR SERVICIO POSTVENTA.

Replacing the VG2600111145 Heat Shield:

1. Wait for Cool Down: Exhaust temperatures can exceed 500°C. Never attempt to replace this part immediately after the engine has been running. Allow at least 2 hours for the engine to cool.

2. Inspect Mounting Bolts: Check the condition of the existing bolts. Heat-cycled bolts often become brittle or rusted; we recommend applying a penetrating oil (like WD-40) before removal.

3. Eliminación: Unbolt the old, damaged shield. Check the exhaust manifold surface for any cracks or leaks while you have clear access.

4. Alineación: Position the new VG2600111145 shield. Ensure it does not touch the manifold directly; there should be a small air gap to allow for thermal expansion.

5. Secure: Hand-tighten all bolts first to ensure correct alignment before torquing them down. Do not over-tighten, as the material needs to expand and contract during operation.

6. Final Check: Start the engine and listen for any rattling sounds, which might indicate the shield is loose or vibrating against another component.