Original-spec WG9525195006 escape pipe (crankcase ventilation tube) for SINOTRUK HOWO A7, t7h, T5G trucks – prevents oil leaks and manages blow-by gases.
WG9525195006 Escape Pipe for SINOTRUK HOWO Trucks – Crankcase Ventilation System Component
Ensure proper engine breathing and prevent oil leakage with this high-quality Escape Pipe (ສ່ວນທີບໍ່. WG9525195006), engineered as a direct replacement for SINOTRUK HOWO A7, t7h, T5G, L9H, and other models equipped with WD615, MC07, MC11, or MC13 diesel engines.
ສະເພາະດ້ານວິຊາການ:
- ເລກສ່ວນ: WG9525195006
- ຫນ້າທີ່: Crankcase Ventilation / Escape Pipe
- Fitment: SINOTRUK HOWO A7, t7h, T5G, L9H
- Engine Compatibility: WD615, MC07, MC11, MC13 series
- ວັດສະດຸ: Oil-resistant EPDM rubber with fabric reinforcement
- Inlet/Outlet Diameter: 22ມມ (0.87″) internal bore
- Total Length: Approx. 650ມມ (flexible design)
- ລະດັບອຸນຫະພູມ: -40° C ເຖິງ + 150 ° C
1. ພວກເຮົາຮັກສາລູກຄ້າທຸກຄົນທີ່ເປັນເພື່ອນຂອງພວກເຮົາ, ຮີບຮ້ອນຕໍ່ຫຼັກການພື້ນຖານ: ເງິນຊ່ວຍເຫຼືອ WIN-WIN ແລະ MUTUAL ;
2. ລາຍລະອຽດຂອງທາງເລືອກ ສຳ ລັບຜະລິດຕະພັນ: ຄຸນນະພາບ, ຍີ່ຫໍ້, ກະເປົ.າ;
3. ພວກເຮົາຈະຕອບແທນທ່ານ ສຳ ລັບຄວາມຕ້ອງການຂອງທ່ານພາຍໃນ 24 ຊົ່ວໂມງ.
4.ຜູ້ສະ ໜອງ ຊິ້ນສ່ວນ SINOTRUCK ທີ່ເປັນມືອາຊີບ
5. ພວກເຮົາຈະຢູ່ໃນການບໍລິການ 24/24 ຊົ່ວໂມງໃນວັນເຮັດວຽກ.
6. ເອສ: ພວກເຮົາຈະສະ ເໜີ ໃຫ້ທ່ານບໍລິການຫລັງການຂາຍທີ່ດີທີ່ສຸດ.
Installation Notes:
Turn off the engine and allow it to cool before servicing.
Locate the crankcase ventilation system near the valve cover or cylinder head.
Disconnect the old WG9525195006 escape pipe from both the valve cover outlet and the air intake inlet (usually pre-turbo).
Remove any mounting clips or brackets securing the pipe along its route.
Inspect for oil sludge, blockages, or carbon buildup in connected ports — clean if necessary.
Install the new escape pipe ensuring correct routing to avoid contact with hot or moving parts.
Reconnect both ends securely using OEM-style clamps; ensure no kinks or sharp bends.
Start the engine and check for abnormal noises, oil misting, or vacuum leaks.
