Ensemble de tuyau d'admission d'air d'origine Sinotruk HOWO VG2600110812 pour la série de moteurs WD615

1. NOUS TRAITONS CHAQUE CLIENT COMME NOTRE AMI, ADHÉREZ AU PRINCIPE: AVANTAGE GAGNANT ET MUTUEL ;
2. UNE VARIÉTÉ DE CHOIX DE PRODUITS: QUALITÉ, MARQUE, EMBALLAGE;
3. NOUS VOUS RÉPONDRE À VOTRE DEMANDE EN 24 HEURES.
4.Fournisseur de pièces SINOTRUCK de performance professionnelle
5. NOUS SERONS EN SERVICE 24/24 HEURES DE LA JOURNÉE DE TRAVAIL.
6. CUL: NOUS VOUS OFFRIRONS LE MEILLEUR SERVICE APRÈS-VENTE.

Tips for Installing the VG2600110812 Intake Pipe:

1. Safety Check: Make sure the engine is stone-cold. Working near the intake/exhaust area while hot can cause severe burns.

2. Inspect Clamps: Before removing the old pipe, check your T-bolt clamps. If they show signs of rust or stretching, replace them along with the new pipe to ensure a leak-proof seal.

3. Clean the Interfaces: Once the old pipe is removed, use a clean rag to wipe down the turbocharger outlet and the manifold inlet. Any grit left behind will compromise the seal.

4. Alignment: Position the VG2600110812 pipe. It’s a tight fit, so don't force it. Ensure it seats flush against the mounting gaskets.

5. Torque Settings: Tighten the mounting bolts in a cross-pattern to distribute pressure evenly. Over-tightening can crack the flange, so follow the standard Sinotruk torque specs.

6. Leak Test: Start the engine and listen for any whistling sounds. A whistle usually indicates a minor air leak which could lead to power loss.