Conjunto de tubo de entrada de aire genuino Sinotruk HOWO VG2600110812 para la serie de motores WD615

1. TRATAMOS A CADA CLIENTE COMO NUESTRO AMIGO, PEGARSE AL PRINCIPIO: BENEFICIO MUTUO Y GANADOR ;
2. UNA VARIEDAD DE ELECCIÓN DE PRODUCTOS: CALIDAD, MARCA, EMBALAJE;
3. LE RESPONDEREMOS SU CONSULTA EN 24 HORAS.
4.Proveedor de piezas de rendimiento profesional SINOTRUCK
5. ESTAREMOS EN SERVICIO 24/24 HORAS DEL DÍA LABORAL.
6. CULO: LE OFRECEMOS EL MEJOR SERVICIO POSTVENTA.

Tips for Installing the VG2600110812 Intake Pipe:

1. Safety Check: Make sure the engine is stone-cold. Working near the intake/exhaust area while hot can cause severe burns.

2. Inspect Clamps: Before removing the old pipe, check your T-bolt clamps. If they show signs of rust or stretching, replace them along with the new pipe to ensure a leak-proof seal.

3. Clean the Interfaces: Once the old pipe is removed, use a clean rag to wipe down the turbocharger outlet and the manifold inlet. Any grit left behind will compromise the seal.

4. Alineación: Position the VG2600110812 pipe. It’s a tight fit, so don't force it. Ensure it seats flush against the mounting gaskets.

5. Torque Settings: Tighten the mounting bolts in a cross-pattern to distribute pressure evenly. Over-tightening can crack the flange, so follow the standard Sinotruk torque specs.

6. Leak Test: Start the engine and listen for any whistling sounds. A whistle usually indicates a minor air leak which could lead to power loss.