As a premium offering in our Sinotruk howo parts range, this air dryer assembly is the first line of defense for your vehicle’s pneumatic health. It doesn’t just filter air; it utilizes a high-capacity desiccant cartridge to strip water vapor and oil aerosols before they reach your reservoir tanks. Specifically tuned for the HOWO and Steyr platforms, this unit ensures your air system remains dry and responsive, even under the high-cycle demands of urban construction or long-haul transport.
Spécifications techniques:
-
Numéro d'article: WG9000360417
-
Catégorie: Air Brake System / Pneumatics
-
Compatibilité: Sinotruk HOWO, Steyr, Prince, Hohan
-
Max Working Pressure: 13.0 Bar (Adjustable Integrated Governor)
-
Heater Voltage: 24V (Prevents purge valve freezing in winter)
-
Port Size: M22 x 1.5 (Supply/Delivery ports)
-
Matériau du boîtier: High-strength anti-corrosive cast aluminum
-
Cartridge Type: Spin-on replacement for easy maintenance
1. NOUS TRAITONS CHAQUE CLIENT COMME NOTRE AMI, ADHÉREZ AU PRINCIPE: AVANTAGE GAGNANT ET MUTUEL ;
2. UNE VARIÉTÉ DE CHOIX DE PRODUITS: QUALITÉ, MARQUE, EMBALLAGE;
3. NOUS VOUS RÉPONDRE À VOTRE DEMANDE EN 24 HEURES.
4.Fournisseur de pièces SINOTRUCK de performance professionnelle
5. NOUS SERONS EN SERVICE 24/24 HEURES DE LA JOURNÉE DE TRAVAIL.
6. CUL: NOUS VOUS OFFRIRONS LE MEILLEUR SERVICE APRÈS-VENTE.
Replacing an air dryer is more than just swapping a part; it's about system maintenance. When installing your new Sinotruk howo parts WG9000360417, keep these field-tested tips in mind:
-
Full System Purge: Avant l'installation, bleed all air tanks completely. Check for excessive oil or water in the drained fluid; if there's a lot of oil, your compressor may also need a service.
-
Verify the Heater Connection: The WG9000360417 features an integrated 24V heater. Ensure the electrical plug is clean and securely fastened to prevent the purge valve from icing up during winter operations.
-
Check the Governor Setting: This unit often includes an integrated governor. Ensure it is calibrated to cut out at the correct pressure for your specific HOWO model (usually around 8.1 à 8.5 bar).
-
Sealing Integrity: Use a light coat of grease on the O-rings, but avoid getting any lubricants inside the air ports. Use professional-grade thread sealant sparingly on the fittings.
-
Initial Cycle Test: After startup, let the pressure build until the dryer "blows off" (the purge cycle). This confirms the unit is functioning and the desiccant is ready for duty.
