Ensemble de poutre d'équilibre d'origine Sinotruk HOWO pour essieu arrière droit – YZ9725528081 (Égaliseur de suspension robuste)

1. NOUS TRAITONS CHAQUE CLIENT COMME NOTRE AMI, ADHÉREZ AU PRINCIPE: AVANTAGE GAGNANT ET MUTUEL ;
2. UNE VARIÉTÉ DE CHOIX DE PRODUITS: QUALITÉ, MARQUE, EMBALLAGE;
3. NOUS VOUS RÉPONDRE À VOTRE DEMANDE EN 24 HEURES.
4.Fournisseur de pièces SINOTRUCK de performance professionnelle
5. NOUS SERONS EN SERVICE 24/24 HEURES DE LA JOURNÉE DE TRAVAIL.
6. CUL: NOUS VOUS OFFRIRONS LE MEILLEUR SERVICE APRÈS-VENTE.

Professional Note: Suspension work on heavy trucks requires specialized lifting equipment. Safety is paramount.

1. Préparation: Support the truck chassis with heavy-duty stands and ensure the rear axles are slightly lowered to relieve tension on the balance beam.

2. Suppression: Remove the central pivot shaft cover and the main retaining nut. You may need a hydraulic puller if the old beam is seized due to rust or heavy debris.

3. Inspection: Before fitting the new YZ9725528081, check the condition of the central pivot shaft and the rubber bushings. A worn shaft will ruin a new balance beam in weeks.

4. Fitting: Slide the new beam onto the pivot shaft. Ensure the orientation is correct for the right-hand side of the vehicle.

5. Greasing: Once installed, pump high-pressure lithium grease into the central grease nipple until you see fresh grease purging from the seals.

6. Couple: Tighten the retaining bolts to Sinotruk’s OEM specifications (refer to your specific model’s workshop manual as torque settings vary by axle capacity).