Genuine Sinotruk HOWO Rear Axle Right Balance Beam Assembly – YZ9725528081 (Heavy Duty Suspension Equalizer)

1. TRATAMOS A CADA CLIENTE COMO NUESTRO AMIGO, PEGARSE AL PRINCIPIO: BENEFICIO MUTUO Y GANADOR ;
2. UNA VARIEDAD DE ELECCIÓN DE PRODUCTOS: CALIDAD, MARCA, EMBALAJE;
3. LE RESPONDEREMOS SU CONSULTA EN 24 HORAS.
4.Proveedor de piezas de rendimiento profesional SINOTRUCK
5. ESTAREMOS EN SERVICIO 24/24 HORAS DEL DÍA LABORAL.
6. CULO: LE OFRECEMOS EL MEJOR SERVICIO POSTVENTA.

Professional Note: Suspension work on heavy trucks requires specialized lifting equipment. Safety is paramount.

1. Preparación: Support the truck chassis with heavy-duty stands and ensure the rear axles are slightly lowered to relieve tension on the balance beam.

2. Eliminación: Remove the central pivot shaft cover and the main retaining nut. You may need a hydraulic puller if the old beam is seized due to rust or heavy debris.

3. Inspection: Before fitting the new YZ9725528081, check the condition of the central pivot shaft and the rubber bushings. A worn shaft will ruin a new balance beam in weeks.

4. Fitting: Slide the new beam onto the pivot shaft. Ensure the orientation is correct for the right-hand side of the vehicle.

5. Greasing: Once installed, pump high-pressure lithium grease into the central grease nipple until you see fresh grease purging from the seals.

6. Esfuerzo de torsión: Tighten the retaining bolts to Sinotruk’s OEM specifications (refer to your specific model’s workshop manual as torque settings vary by axle capacity).