Genuine-style high-pressure diesel fuel filter (WG9716550107) for SINOTRUK HOWO A7, T7H, T5G trucks — protects common rail system with fine filtration.
WG9716550107 High Pressure Fuel Filter for SINOTRUK HOWO Trucks – Precision Filtration for Diesel Engines
Protect your SINOTRUK HOWO’s fuel injection system with this high-performance High Pressure Fuel Filter (Bagian No. WG9716550107) — engineered as a direct OEM replacement for models including A7, T7H, T5g, L9H, and other variants powered by WD615, MC07, MC11, and MC13 series diesel engines.
Spesifikasi teknis:
- Nomor bagian: WG9716550107
- Fungsi: High-Pressure Diesel Fuel Filter
- Fitment: SINOTRUK HOWO A7 / T7H / T5g / L9H
- Engine Compatibility: WD615, MC07, MC11, MC13
- Filtration Efficiency: 99% @ 3–5 microns (Iso 19438 compliant)
- Tekanan operasi: Up to 1,800 batang (intermittent)
- Bahan: Reinforced composite housing + stainless steel fittings
- Seal Type: Nitrile rubber O-ring (fuel resistant)
- Service Interval: 20,000–30,000 km (depending on fuel quality)
1. KAMI MEMPERLAKUKAN SETIAP PELANGGAN SEBAGAI TEMAN KAMI, TETAP PADA PRINSIP: MENANG-MENANG DAN MANFAAT BERSAMA ;
2. BERBAGAI PILIHAN PRODUK: KUALITAS, MEREK, PENGEMASAN;
3. KAMI AKAN MEMBALAS ANDA ATAS PERTANYAAN ANDA DI 24 JAM.
4.Pemasok suku cadang SINOTRUCK Kinerja Profesional
5. KAMI AKAN MELAYANI 24/24 JAM PADA HARI KERJA.
6. PANTAT: KAMI AKAN MENAWARKAN LAYANAN SETELAH PENJUALAN YANG TERBAIK.
Catatan Instalasi:
Turn off the engine and relieve fuel system pressure before starting work.
Locate the high-pressure fuel filter housing on the engine side or near the fuel pump.
Use clean rags and safety gloves; disconnect inlet and outlet fuel lines using appropriate line wrenches.
Remove mounting bolt(s) securing the old WG9716550107 filter.
Drain residual fuel into a proper container.
Lubricate the new filter’s O-ring lightly with clean diesel or engine oil.
Install the new filter and hand-tighten — follow torque specs (typically 25–30 Nm).
Bleed air from the fuel system using the manual priming pump or electric primer.
Start the engine and check for leaks at connections under running conditions.
