Sinotruk HOWO Genuine 080-02400-6055 Connecting Rod Assembly
This genuine Sinotruk HOWO connecting rod assembly (ສ່ວນທີບໍ່: 080-02400-6055) is engineered to exact OEM specifications for optimal engine performance and longevity. Designed for durability under extreme operating conditions, it ensures precise piston movement and reliable power transmission in HOWO truck engines.
Technical Specifications:
Material: Forged alloy steel
Weight: 2.4 ກິໂລກຣາມ (approximately)
Length: 218 mm center-to-center
Bore Size: 55 ມມ (big end), 38 ມມ (small end)
Compatibility: HOWO A7, t7h, T5G series engines
Surface Treatment: Phosphated for corrosion resistance
Manufacturing Standard: ISO 9001 certified
1. ພວກເຮົາຮັກສາລູກຄ້າທຸກຄົນທີ່ເປັນເພື່ອນຂອງພວກເຮົາ, ຮີບຮ້ອນຕໍ່ຫຼັກການພື້ນຖານ: ເງິນຊ່ວຍເຫຼືອ WIN-WIN ແລະ MUTUAL ;
2. ລາຍລະອຽດຂອງທາງເລືອກ ສຳ ລັບຜະລິດຕະພັນ: ຄຸນນະພາບ, ຍີ່ຫໍ້, ກະເປົ.າ;
3. ພວກເຮົາຈະຕອບແທນທ່ານ ສຳ ລັບຄວາມຕ້ອງການຂອງທ່ານພາຍໃນ 24 ຊົ່ວໂມງ.
4.ຜູ້ສະ ໜອງ ຊິ້ນສ່ວນ SINOTRUCK ທີ່ເປັນມືອາຊີບ
5. ພວກເຮົາຈະຢູ່ໃນການບໍລິການ 24/24 ຊົ່ວໂມງໃນວັນເຮັດວຽກ.
6. ເອສ: ພວກເຮົາຈະສະ ເໜີ ໃຫ້ທ່ານບໍລິການຫລັງການຂາຍທີ່ດີທີ່ສຸດ.
Installation Notes
Installation Guidelines for 080-02400-6055 Connecting Rod Assembly:
1.Preparation: Ensure engine is cool and disconnected from power sources. Clean all mating surfaces thoroughly.
2.Bearing Installation: Install new rod bearings with proper lubrication. Verify clearance specifications (0.03-0.06 ມມ).
3.Torque Specifications: Tighten connecting rod bolts in two stages:
First pass: 50 Nm
Final pass: 90° angular torque plus 15° additional turn
4.Alignment Check: Verify rod alignment with crankshaft journal. Ensure free movement without binding.
5.Clearance Verification: Check side clearance between connecting rods (0.10-0.35 ມມ).
6.Lubrication: Prime oil system before initial startup to prevent dry operation.
Warning: Always replace connecting rods in complete sets. Use calibrated torque wrench for accurate tightening. Improper installation may cause severe engine damage.
