ຍິນດີຕ້ອນຮັບສູ່ເວັບໄຊທ໌້ຂອງພວກເຮົາ

ຊິ້ນສ່ວນເຄື່ອງຈັກ Sinotruk

» ຊິ້ນສ່ວນເຄື່ອງຈັກ Sinotruk

Original SINOTRUK HOWO Engine Valve Seal VG1560040032 – High-Temperature Resistant Rubber Seal for Sinotruk Spare Parts

ປະເພດແລະຮູບພາບ:
ຊິ້ນສ່ວນເຄື່ອງຈັກ Sinotruk

Why Choose Us?
Reliable Quality: Our products meet the highest industry standards.
Quick Delivery: Efficient shipping to ensure minimal downtime.
ສະຫນັບສະຫນູນຜູ້ຊ່ຽວຊານ: Professional assistance for installation and troubleshooting.

ສອບຖາມ
  • ຂໍ້ສະເພາະ
  • ການບໍລິການ
  • Installation Notes
  • ຊຸດ

Genuine-specification valve stem seal replacement for SINOTRUK HOWO diesel engines. Part number VG1560040032. Essential engine component in regular maintenance and overhaul kits.

SINOTRUK OEM-Compatible Engine Valve Seal – Model VG1560040032 | For HOWO Truck Diesel Engines

Ensure maximum engine efficiency and prevent excessive oil consumption with this genuine-specification valve stem seal (ສ່ວນທີບໍ່. VG1560040032) , designed specifically for SINOTRUK HOWO trucks equipped with WD615, D10, and MC05/MC07 series engines. This critical engine spare part plays a vital role in maintaining proper lubrication balance while preventing engine oil from leaking into the combustion chamber — a common cause of blue exhaust smoke and reduced performance.

Manufactured using high-temperature resistant NBR (nitrile butadiene rubber) or optional FKM (fluoroelastomer/Viton®) material, ໄດ້ VG1560040032 valve seal withstands extreme heat up to 250°C, aggressive blow-by gases, and prolonged exposure to diesel fuel and oil contaminants. Its precision-molded design ensures perfect fitment on the valve guide, offering long-term sealing integrity under heavy-duty operation.

This part is widely used in Sinotruk spare parts maintenance programs, especially during mid-life engine services, injector replacements, or turbocharger repairs. It fits both intake and exhaust valves across multiple models including HOWO A7, A5, t7h, T5G, cement mixers, dump trucks, and logistics vehicles.

ສະເພາະດ້ານວິຊາການ:

  • ຫມາຍເລກສ່ວນ OEM: VG1560040032
  • ຫນ້າທີ່: Valve Stem Oil Seal (Intake & Exhaust)
  • ວັດສະດຸ: High-Temp NBR or FKM (Optional)
  • Outer Diameter (OD): ~28.5 mm
  • Inner Diameter (ID): ~8.0 mm (fits standard valve stems)
  • Height: ~12.0 mm
  • ລະດັບອຸນຫະພູມ: -40°C to +250°C
  • Compatibility Engines: SINOTRUK WD615, D10, MC05, MC07, MC11
  • Fitment Models: HOWO A5, ກ 7, T5G, t7h, ST1, ST7
  • ໃບສະ ໝັກ: Diesel Truck, Bus, Construction Equipment
  • Sealing Type: Positive Contact Lip Seal with Retaining Spring
  • Packaging: 16 pcs/set (per engine), vacuum sealed per cylinder bank

Package Includes:
1 x Valve Seal Set (16 pcs total for full engine), Installation Guide (PDF available online)

Trusted by fleet operators in Nigeria, Kenya, South Africa, Pakistan, Bangladesh, Indonesia, and UAE. Ships globally

1. ພວກເຮົາຮັກສາລູກຄ້າທຸກຄົນທີ່ເປັນເພື່ອນຂອງພວກເຮົາ, ຮີບຮ້ອນຕໍ່ຫຼັກການພື້ນຖານ: ເງິນຊ່ວຍເຫຼືອ WIN-WIN ແລະ MUTUAL ;
2. ລາຍລະອຽດຂອງທາງເລືອກ ສຳ ລັບຜະລິດຕະພັນ: ຄຸນນະພາບ, ຍີ່ຫໍ້, ກະເປົ.າ;
3. ພວກເຮົາຈະຕອບແທນທ່ານ ສຳ ລັບຄວາມຕ້ອງການຂອງທ່ານພາຍໃນ 24 ຊົ່ວໂມງ.
4.ຜູ້ສະ ໜອງ ຊິ້ນສ່ວນ SINOTRUCK ທີ່ເປັນມືອາຊີບ
5. ພວກເຮົາຈະຢູ່ໃນການບໍລິການ 24/24 ຊົ່ວໂມງໃນວັນເຮັດວຽກ.
6. ເອສ: ພວກເຮົາຈະສະ ເໜີ ໃຫ້ທ່ານບໍລິການຫລັງການຂາຍທີ່ດີທີ່ສຸດ.

How to Install the VG1560040032 Valve Seal on SINOTRUK HOWO Engines:

  1. Drain Coolant & Remove Valve Cover: Shut down engine, wait to cool, then drain coolant slightly below head level. Remove bolts and gasket from cylinder head cover.
  2. Decompress Valves: Rotate engine to TDC (Top Dead Center) and lock camshaft to prevent valve drop.
  3. Compress Valve Springs: Use a valve spring compressor tool to compress the spring and remove the keepers (collets).
  4. Remove Old Valve Seal: Carefully pull off the old rubber seal from the valve guide using pliers or tweezers. Clean carbon deposits with brake cleaner.
  5. Install New Valve Seal (VG1560040032): Slide the new high-temperature nitrile rubber or FKM (Viton®-type) seal onto the valve stem guide. Ensure it sits flush against the guide top.
  6. Reinstall Keepers & Release Spring: Reinsert collets, release compressor slowly, ensuring even seating.
  7. Repeat for All Cylinders: Replace all worn seals during engine service to prevent oil consumption.
  8. Reassemble & Test: Reinstall rocker arms, valve cover with new gasket, refill coolant, start engine, and check for blue smoke (oil burning) — indicates faulty seal installation.

ແບບຟອມສອບຖາມ (ພວກເຮົາຈະກັບຄືນຫາທ່ານ ASAP)

ຊື່:
*
ອີເມວ:
*
ຂໍ້ຄວາມ:

ການຢັ້ງຢືນ:
0 + 5 = ?

ບາງທີເຈົ້າອາດມັກເຊັ່ນກັນ

  • ຊິ້ນສ່ວນເຄື່ອງຈັກ sinotruk

    ຊິ້ນສ່ວນເຄື່ອງຈັກ sinotruk
    ອາໄຫຼ່ເຄື່ອງຈັກ sinotruk howo
    ຜູ້ຜະລິດເຄື່ອງຈັກ sinotruk
    ຕົວແທນ ຈຳ ໜ່າຍ ເຄື່ອງຈັກ sinotruk
    ເຄື່ອງຈັກ sinotruk a7
    ເຄື່ອງຈັກກາຊວນ sinotruk
    ເຄື່ອງຈັກ sinotruk howo

  • sinotruk ຫ້ອງໂດຍສານ

    sinotruk ຫ້ອງໂດຍສານ
    sinotruk ຫ້ອງໂດຍສານ
    sinotruk howo ຫ້ອງໂດຍສານ
    ພາກສ່ວນ sinotruk ພາກໃຕ້ຂອງອາຟຣິກກາ
    ຊິ້ນສ່ວນເຄື່ອງຈັກ sinotruk
    ຊິ້ນສ່ວນ sinotruk nz
    sinotruk usa

  • ຊິ້ນສ່ວນ sinotruk

    ຊິ້ນສ່ວນລົດບັນທຸກ Jinan Sino ຊ່ຽວຊານ
    ໃນການສົ່ງອອກອາໄຫຼ່ລົດບັນທຸກສິນຄ້າ Sino
    info@sinotrukspareparts.com
    ຕື່ມ:ເລກທີ 932, ສູນ ຈຳ ໜ່າຍ ອາໄຫຼ່ QuanLi,Lanxiang Str. ,Tian Qiao Distrbut,ຈິນ ,ຈີນ