ຊຸດທໍາມະດາ AZ165124000 – ອາໄຫຼ່ທີ່ມີຫນ້າທີ່ຫນັກ
Technical Description
Core Features
- OEM replacement for HOWO A7/T7 series trucks (2018-2025 ຮູບແບບ)
- High-strength steel construction (Q345B material, 5mm thickness)
- Pre-drilled mounting holes (6xφ12mm with M10 thread inserts)
Installation Parameters
| Specification |
ຄຸນຄ່າ |
| ນໍ້າ ໜັກ |
3.2kg ±2% |
| Surface Treatment |
Electrostatic painting (RAL 9010 ມາດຕະຖານ) |
| Torque Requirements |
45-50Nm for mounting bolts |
1. ພວກເຮົາຮັກສາລູກຄ້າທຸກຄົນທີ່ເປັນເພື່ອນຂອງພວກເຮົາ, ຮີບຮ້ອນຕໍ່ຫຼັກການພື້ນຖານ: ເງິນຊ່ວຍເຫຼືອ WIN-WIN ແລະ MUTUAL ;
2. ລາຍລະອຽດຂອງທາງເລືອກ ສຳ ລັບຜະລິດຕະພັນ: ຄຸນນະພາບ, ຍີ່ຫໍ້, ກະເປົ.າ;
3. ພວກເຮົາຈະຕອບແທນທ່ານ ສຳ ລັບຄວາມຕ້ອງການຂອງທ່ານພາຍໃນ 24 ຊົ່ວໂມງ.
4.ຜູ້ສະ ໜອງ ຊິ້ນສ່ວນ SINOTRUCK ທີ່ເປັນມືອາຊີບ
5. ພວກເຮົາຈະຢູ່ໃນການບໍລິການ 24/24 ຊົ່ວໂມງໃນວັນເຮັດວຽກ.
6. ເອສ: ພວກເຮົາຈະສະ ເໜີ ໃຫ້ທ່ານບໍລິການຫລັງການຂາຍທີ່ດີທີ່ສຸດ.
Installation Preparation
-
Component Verification
- Confirm bracket orientation (right-side specific for AZ1651240006)
- Check 6xφ12mm pre-drilled holes for alignment with vehicle mounting points
-
Surface Preparation
- Clean installation area thoroughly using wire brush (remove rust/paint residues)
- Verify 5mm steel bracket thickness with caliper measurement
Installation Sequence
Step 1: Positioning
- Align bracket with chassis mounting points using 2x pilot screws (M10x1.25)
- Ensure 10mm clearance from adjacent brake lines
Step 2: Fastener Installation
| Component |
Torque Specification |
| M10 bolts |
45-50Nm (cross pattern) |
| Lock nuts |
35Nm + 1/4 turn |
Step 3: Final Verification
- Confirm bracket rigidity (max deflection ≤2mm under 150kg load)
- Test pedal movement range (full depression without obstruction)
Critical Notes
- Use anti-seize compound (LOCTITE 771) on all threads
- Required tools: 17mm combination wrench, torque wrench (50Nm range)
- Post-installation inspection after 500km operation
