Sinotruk Howo Footrest Bracket AZ1651240006 yang asli – Pedal Dukungan Tugas Berat Bagian Cadang
Technical Description
Fitur Inti
- OEM replacement for HOWO A7/T7 series trucks (2018-2025 model)
- High-strength steel construction (Q345B material, 5mm thickness)
- Pre-drilled mounting holes (6xφ12mm with M10 thread inserts)
Installation Parameters
| Specification |
Nilai |
| Bobot |
3.2kg ±2% |
| Surface Treatment |
Electrostatic painting (RAL 9010 standar) |
| Torque Requirements |
45-50Nm for mounting bolts |
1. KAMI MEMPERLAKUKAN SETIAP PELANGGAN SEBAGAI TEMAN KAMI, TETAP PADA PRINSIP: MENANG-MENANG DAN MANFAAT BERSAMA ;
2. BERBAGAI PILIHAN PRODUK: KUALITAS, MEREK, PENGEMASAN;
3. KAMI AKAN MEMBALAS ANDA ATAS PERTANYAAN ANDA DI 24 JAM.
4.Pemasok suku cadang SINOTRUCK Kinerja Profesional
5. KAMI AKAN MELAYANI 24/24 JAM PADA HARI KERJA.
6. PANTAT: KAMI AKAN MENAWARKAN LAYANAN SETELAH PENJUALAN YANG TERBAIK.
Installation Preparation
-
Component Verification
- Confirm bracket orientation (right-side specific for AZ1651240006)
- Check 6xφ12mm pre-drilled holes for alignment with vehicle mounting points
-
Surface Preparation
- Clean installation area thoroughly using wire brush (remove rust/paint residues)
- Verify 5mm steel bracket thickness with caliper measurement
Installation Sequence
Melangkah 1: Positioning
- Align bracket with chassis mounting points using 2x pilot screws (M10x1.25)
- Ensure 10mm clearance from adjacent brake lines
Melangkah 2: Fastener Installation
| Component |
Torque Specification |
| M10 bolts |
45-50Nm (cross pattern) |
| Lock nuts |
35Nm + 1/4 turn |
Melangkah 3: Final Verification
- Confirm bracket rigidity (max deflection ≤2mm under 150kg load)
- Test pedal movement range (full depression without obstruction)
Critical Notes
- Use anti-seize compound (LOCTITE 771) on all threads
- Required tools: 17mm combination wrench, torque wrench (50Nm range)
- Post-installation inspection after 500km operation
