Genuine Sinotruk Howo T5G Oil-Gas Separator (Open Type) – MAN MC07 Engine Spare Parts | PN 082V01804-0011

1. NOUS TRAITONS CHAQUE CLIENT COMME NOTRE AMI, ADHÉREZ AU PRINCIPE: AVANTAGE GAGNANT ET MUTUEL ;
2. UNE VARIÉTÉ DE CHOIX DE PRODUITS: QUALITÉ, MARQUE, EMBALLAGE;
3. NOUS VOUS RÉPONDRE À VOTRE DEMANDE EN 24 HEURES.
4.Fournisseur de pièces SINOTRUCK de performance professionnelle
5. NOUS SERONS EN SERVICE 24/24 HEURES DE LA JOURNÉE DE TRAVAIL.
6. CUL: NOUS VOUS OFFRIRONS LE MEILLEUR SERVICE APRÈS-VENTE.

1. Hose Inspection: Before fitting the new separator, inspect all connected breather hoses for cracks or "softening" caused by heat. Replace any damaged hoses to prevent air leaks.

2. O-Ring Sealing: Ensure the sealing ring is seated perfectly in the groove. Lightly coat the seal with fresh MC07 engine oil to prevent pinching during installation.

3. Torque Specs: Tighten mounting bolts to the Sinotruk factory specification (usually 10-12 Nm). Over-tightening can crack the plastic housing.

4. Crankcase Pressure Check: Après l'installation, start the engine and check for any unusual whistling sounds, which could indicate a vacuum leak or an improperly seated unit.

5. Intervalle d'entretien: For mining or heavy-dust environments, we recommend inspecting this separator every 30,000km to ensure the internal mesh isn't clogged with sludge.