Genuine Sinotruk Howo T5G Oil-Gas Separator (Open Type) – MAN MC07 Engine Spare Parts | PN 082V01804-0011

1. TRATAMOS A CADA CLIENTE COMO NUESTRO AMIGO, PEGARSE AL PRINCIPIO: BENEFICIO MUTUO Y GANADOR ;
2. UNA VARIEDAD DE ELECCIÓN DE PRODUCTOS: CALIDAD, MARCA, EMBALAJE;
3. LE RESPONDEREMOS SU CONSULTA EN 24 HORAS.
4.Proveedor de piezas de rendimiento profesional SINOTRUCK
5. ESTAREMOS EN SERVICIO 24/24 HORAS DEL DÍA LABORAL.
6. CULO: LE OFRECEMOS EL MEJOR SERVICIO POSTVENTA.

1. Hose Inspection: Before fitting the new separator, inspect all connected breather hoses for cracks or "softening" caused by heat. Replace any damaged hoses to prevent air leaks.

2. O-Ring Sealing: Ensure the sealing ring is seated perfectly in the groove. Lightly coat the seal with fresh MC07 engine oil to prevent pinching during installation.

3. Torque Specs: Tighten mounting bolts to the Sinotruk factory specification (usually 10-12 Nuevo Méjico). Over-tightening can crack the plastic housing.

4. Crankcase Pressure Check: After installation, start the engine and check for any unusual whistling sounds, which could indicate a vacuum leak or an improperly seated unit.

5. Service Interval: For mining or heavy-dust environments, we recommend inspecting this separator every 30,000km to ensure the internal mesh isn't clogged with sludge.