Genuine Sinotruk Exhaust Manifold 081V08102-0161 for HOWOStryker Series Trucks – High-Temperature Cast Iron Construction
Product Overview
Original Part Number: 081V08102-0161
Compatible Models:
Sinotruk HOWO A7/Sitrak T7H/T5G
Stryker Series (2015-2025)
WD615/WD618 engine variants
Spesifikasi teknis
Bahan: High-grade cast iron (GGG40)
Operating Temperature: -40°F to 1200°F (-40°C to 650°C)
Surface Treatment: Anti-corrosion ceramic coating
Flange Thickness: 25mm ±0.5mm
Bobot: 8.7 kg (19.2 lbs)
Bolt Hole Pattern: 8xM10-1.25
Jaminan: 18 months against manufacturing defects
1. KAMI MEMPERLAKUKAN SETIAP PELANGGAN SEBAGAI TEMAN KAMI, TETAP PADA PRINSIP: MENANG-MENANG DAN MANFAAT BERSAMA ;
2. BERBAGAI PILIHAN PRODUK: KUALITAS, MEREK, PENGEMASAN;
3. KAMI AKAN MEMBALAS ANDA ATAS PERTANYAAN ANDA DI 24 JAM.
4.Pemasok suku cadang SINOTRUCK Kinerja Profesional
5. KAMI AKAN MELAYANI 24/24 JAM PADA HARI KERJA.
6. PANTAT: KAMI AKAN MENAWARKAN LAYANAN SETELAH PENJUALAN YANG TERBAIK.
Pre-Installation Check:
Verify engine compatibility (WD615/WD618 series
Clean mating surfaces with wire brush (Iso 8501-1 St2 standard)
Torque Specifications:
Manifold-to-engine bolts: 45-50 Nm (33-37 ft-lbs) in crisscross pattern
Turbocharger connection: 60-65 Nm (44-48 ft-lbs)
Post-Installation:
Run engine at idle for 15 minutes to allow thermal expansion
Re-torque after first 500km of operation
