Selamat datang di website kami

Suku Cadang Mesin Sinotruk

» Suku Cadang Mesin Sinotruk

Original SINOTRUK HOWO Engine Valve Seal VG1560040032 – High-Temperature Resistant Rubber Seal for Sinotruk Spare Parts

KATEGORI DAN TAG:
Suku Cadang Mesin Sinotruk

Mengapa Memilih Kami?
Kualitas yang dapat diandalkan: Produk kami memenuhi standar industri tertinggi.
Pengiriman cepat: Pengiriman yang efisien untuk memastikan waktu henti minimal.
Dukungan ahli: Bantuan profesional untuk pemasangan dan pemecahan masalah.

penyelidikan
  • Spesifikasi
  • Layanan
  • Catatan Instalasi
  • Paket

Genuine-specification valve stem seal replacement for SINOTRUK HOWO diesel engines. Part number VG1560040032. Essential engine component in regular maintenance and overhaul kits.

SINOTRUK OEM-Compatible Engine Valve Seal – Model VG1560040032 | For HOWO Truck Diesel Engines

Ensure maximum engine efficiency and prevent excessive oil consumption with this genuine-specification valve stem seal (Bagian No. VG1560040032) , designed specifically for SINOTRUK HOWO trucks equipped with WD615, D10, and MC05/MC07 series engines. This critical engine spare part plays a vital role in maintaining proper lubrication balance while preventing engine oil from leaking into the combustion chamber — a common cause of blue exhaust smoke and reduced performance.

Manufactured using high-temperature resistant NBR (nitrile butadiene rubber) or optional FKM (fluoroelastomer/Viton®) material, itu VG1560040032 valve seal withstands extreme heat up to 250°C, aggressive blow-by gases, and prolonged exposure to diesel fuel and oil contaminants. Its precision-molded design ensures perfect fitment on the valve guide, offering long-term sealing integrity under heavy-duty operation.

This part is widely used in Sinotruk spare parts maintenance programs, especially during mid-life engine services, injector replacements, or turbocharger repairs. It fits both intake and exhaust valves across multiple models including HOWO A7, A5, T7H, T5g, cement mixers, dump trucks, and logistics vehicles.

Spesifikasi teknis:

  • OEM Part Number: VG1560040032
  • Fungsi: Valve Stem Oil Seal (Intake & Exhaust)
  • Bahan: High-Temp NBR or FKM (Optional)
  • Outer Diameter (OD): ~28.5 mm
  • Inner Diameter (ID): ~8.0 mm (fits standard valve stems)
  • Height: ~12.0 mm
  • Kisaran suhu: -40°C to +250°C
  • Compatibility Engines: SINOTRUK WD615, D10, MC05, MC07, MC11
  • Fitment Models: HOWO A5, A7, T5g, T7H, ST1, ST7
  • Aplikasi: Diesel Truck, Bus, Construction Equipment
  • Sealing Type: Positive Contact Lip Seal with Retaining Spring
  • Kemasan: 16 pcs/set (per engine), vacuum sealed per cylinder bank

Package Includes:
1 x Valve Seal Set (16 pcs total for full engine), Installation Guide (PDF available online)

Trusted by fleet operators in Nigeria, Kenya, South Africa, Pakistan, Bangladesh, Indonesia, and UAE. Ships globally

1. KAMI MEMPERLAKUKAN SETIAP PELANGGAN SEBAGAI TEMAN KAMI, TETAP PADA PRINSIP: MENANG-MENANG DAN MANFAAT BERSAMA ;
2. BERBAGAI PILIHAN PRODUK: KUALITAS, MEREK, PENGEMASAN;
3. KAMI AKAN MEMBALAS ANDA ATAS PERTANYAAN ANDA DI 24 JAM.
4.Pemasok suku cadang SINOTRUCK Kinerja Profesional
5. KAMI AKAN MELAYANI 24/24 JAM PADA HARI KERJA.
6. PANTAT: KAMI AKAN MENAWARKAN LAYANAN SETELAH PENJUALAN YANG TERBAIK.

How to Install the VG1560040032 Valve Seal on SINOTRUK HOWO Engines:

  1. Drain Coolant & Remove Valve Cover: Shut down engine, wait to cool, then drain coolant slightly below head level. Remove bolts and gasket from cylinder head cover.
  2. Decompress Valves: Rotate engine to TDC (Top Dead Center) and lock camshaft to prevent valve drop.
  3. Compress Valve Springs: Use a valve spring compressor tool to compress the spring and remove the keepers (collets).
  4. Remove Old Valve Seal: Carefully pull off the old rubber seal from the valve guide using pliers or tweezers. Clean carbon deposits with brake cleaner.
  5. Install New Valve Seal (VG1560040032): Slide the new high-temperature nitrile rubber or FKM (Viton®-type) seal onto the valve stem guide. Ensure it sits flush against the guide top.
  6. Reinstall Keepers & Release Spring: Reinsert collets, release compressor slowly, ensuring even seating.
  7. Repeat for All Cylinders: Replace all worn seals during engine service to prevent oil consumption.
  8. Reassemble & Test: Reinstall rocker arms, valve cover with new gasket, refill coolant, start engine, and check for blue smoke (oil burning) — indicates faulty seal installation.

Formulir Pertanyaan (kami akan menghubungi Anda secepatnya)

Nama:
*
Surel:
*
Pesan:

Verifikasi:
0 + 9 = ?

Mungkin Anda juga suka

  • suku cadang mesin sinotruk

    suku cadang mesin sinotruk
    suku cadang mesin sinotruk howo
    produsen mesin sinotruk
    dealer mesin sinotruk
    mesin sinotruk a7
    mesin diesel sinotruk
    mesin sinotruk howo

  • kabin sinotruk

    kabin sinotruk
    kabin sinotruk
    kabin sinotruk howo
    bagian sinotruk afrika selatan
    suku cadang mesin sinotruk
    sinotruk bagian nz
    sinotruk usa

  • bagian sinotruk

    Bagian truk Jinan Sino mengkhususkan diri
    dalam mengekspor suku cadang truk Sino
    info@sinotrukspareparts.com
    Menambahkan:No. 932, pusat suku cadang QuanLi,Lanxiang Str. ,Distrbut Tian Qiao,Jinan ,Cina