Selamat datang di website kami

Suku Cadang Mesin Sinotruk

» Suku Cadang Mesin Sinotruk

Original SINOTRUK HOWO Fan Belt VG2600020253 – Heavy-Duty V-Ribbed Drive Belt for Sinotruk Spare Parts | Compatible with HOWO A7 T7H Trucks

KATEGORI DAN TAG:
Suku Cadang Mesin Sinotruk

Mengapa Memilih Kami?
Kualitas yang dapat diandalkan: Produk kami memenuhi standar industri tertinggi.
Pengiriman cepat: Pengiriman yang efisien untuk memastikan waktu henti minimal.
Dukungan ahli: Bantuan profesional untuk pemasangan dan pemecahan masalah.

penyelidikan
  • Spesifikasi
  • Layanan
  • Catatan Instalasi
  • Paket

OEM-spec serpentine drive belt for SINOTRUK HOWO trucks. Part number VG2600020253. Durable multi-ribbed belt for alternator, compressor, and water pump in fleet maintenance.

SINOTRUK OEM-Compatible Fan Belt – Model VG2600020253 | For HOWO A7, T7H, T5g & Mining Trucks

Ensure reliable power transmission and prevent engine overheating with this genuine-specification fan belt (Bagian No. VG2600020253) , engineered specifically for SINOTRUK HOWO heavy-duty trucks including A7, T7H, T5g, ST1, and mining/dump truck variants. Designed as a direct-fit replacement for original equipment, this high-strength serpentine drive belt drives critical components such as the alternator, air conditioning compressor, pompa air, and power steering pump, making it one of the most essential Suku cadang sinotruk in daily fleet operations.

Manufactured using EPDM (Ethylene Propylene Diene Monomer) rubber with embedded polyester tension cords, this fan belt delivers superior resistance to heat, ozone, cracking, and stretching — even under extreme operating conditions found in Africa, Southeast Asia, the Middle East, and South America. Its 6-rib or 7-rib design ensures maximum grip and efficient energy transfer across multiple pulleys.

Itu VG2600020253 is compatible with SINOTRUK WD615, MC05, MC07, and MC11 series engines, and fits seamlessly into factory routing systems without modification. It features anti-static properties to reduce electrical interference and extend alternator life.

This belt is widely used by transport companies, mining fleets, and repair workshops where downtime must be minimized and reliability is paramount.

Spesifikasi teknis:

  • OEM Part Number: VG2600020253
  • Belt Type: Multi-Ribbed Serpentine / V-Ribbed Belt
  • Number of Ribs: 6 atau 7 (depending on engine configuration)
  • Length: 2025 mm ± 5 mm (standard metric size)
  • Width: Approx. 25.4 mm (1 inch)
  • Bahan: EPDM Rubber + Polyester Cord Reinforcement
  • Kisaran suhu: -40°C to +130°C
  • Tensile Strength: 8,000 N
  • Static Conductivity: < 10⁸ Ω (anti-static compliant)
  • Compatibility Engines: WD615, MC05, MC07, MC11
  • Fitment Models: HOWO A5, A7, T5g, T7H, ST1, Dump Trucks, Cement Mixers
  • Driven Components: Alternator, Pompa air, AC Compressor, Power Steering Pump
  • Kemasan: Individually wrapped in protective film; sealed polybag with model label

Package Includes:
1 x Fan Belt (VG2600020253), Installation Guide (PDF available online)

Ships globally. Trusted by logistics operators in Nigeria, Kenya, Pakistan, Indonesia, UAE, and Peru.

1. KAMI MEMPERLAKUKAN SETIAP PELANGGAN SEBAGAI TEMAN KAMI, TETAP PADA PRINSIP: MENANG-MENANG DAN MANFAAT BERSAMA ;
2. BERBAGAI PILIHAN PRODUK: KUALITAS, MEREK, PENGEMASAN;
3. KAMI AKAN MEMBALAS ANDA ATAS PERTANYAAN ANDA DI 24 JAM.
4.Pemasok suku cadang SINOTRUCK Kinerja Profesional
5. KAMI AKAN MELAYANI 24/24 JAM PADA HARI KERJA.
6. PANTAT: KAMI AKAN MENAWARKAN LAYANAN SETELAH PENJUALAN YANG TERBAIK.

How to Install the VG2600020253 Fan Belt on SINOTRUK HOWO Trucks:

  1. Turn Off Engine & Disconnect Battery: Always disconnect the negative terminal before working on moving components.
  2. Inspect Old Belt Condition: Check for cracks, fraying, glazing, or rib separation — signs of wear requiring replacement.
  3. Locate Belt Routing Diagram: Refer to the engine bay label or manual for correct routing path across pulleys (alternator, AC compressor, pompa air, pemalas).
  4. Release Tensioner Pulley: Use a 15–18mm breaker bar or tensioner tool to rotate the automatic belt tensioner and release pressure.
  5. Remove Old Fan Belt: Slide the old belt off all pulleys carefully without damaging nearby hoses or wiring.
  6. Install New Belt (VG2600020253): Route the new 6-rib or 7-rib V-ribbed belt following the diagram precisely. Ensure each rib seats fully into the pulley grooves.
  7. Engage Belt Under Tension: While holding the tensioner open, guide the last section of the belt over the final pulley (usually alternator or crankshaft).
  8. Release Tensioner Slowly: Allow the spring-loaded arm to apply proper tension automatically. Never force it.
  9. Verify Alignment & Tension: Spin the belt by hand — should run straight without wobbling. Deflection should be ~8–12 mm at midpoint under finger pressure.
  10. Test Operation: Reconnect battery, start engine, and listen for squealing (indicates misalignment or low tension).

Formulir Pertanyaan (kami akan menghubungi Anda secepatnya)

Nama:
*
Surel:
*
Pesan:

Verifikasi:
1 + 6 = ?

Mungkin Anda juga suka

  • suku cadang mesin sinotruk

    suku cadang mesin sinotruk
    suku cadang mesin sinotruk howo
    produsen mesin sinotruk
    dealer mesin sinotruk
    mesin sinotruk a7
    mesin diesel sinotruk
    mesin sinotruk howo

  • kabin sinotruk

    kabin sinotruk
    kabin sinotruk
    kabin sinotruk howo
    bagian sinotruk afrika selatan
    suku cadang mesin sinotruk
    sinotruk bagian nz
    sinotruk usa

  • bagian sinotruk

    Bagian truk Jinan Sino mengkhususkan diri
    dalam mengekspor suku cadang truk Sino
    info@sinotrukspareparts.com
    Menambahkan:No. 932, pusat suku cadang QuanLi,Lanxiang Str. ,Distrbut Tian Qiao,Jinan ,Cina