ยินดีต้อนรับสู่เว็บไซต์ของเรา

อะไหล่เครื่องยนต์ Sinotruk

» อะไหล่เครื่องยนต์ Sinotruk

Original SINOTRUK HOWO Fan Belt VG2600020253 – Heavy-Duty V-Ribbed Drive Belt for Sinotruk Spare Parts | Compatible with HOWO A7 T7H Trucks

หมวดหมู่และแท็ก:
อะไหล่เครื่องยนต์ Sinotruk

ทำไมต้องเลือกเรา?
คุณภาพที่เชื่อถือได้: ผลิตภัณฑ์ของเราเป็นไปตามมาตรฐานอุตสาหกรรมสูงสุด.
จัดส่งอย่างรวดเร็ว: การจัดส่งที่มีประสิทธิภาพเพื่อให้แน่ใจว่าหยุดทำงานน้อยที่สุด.
สนับสนุนผู้เชี่ยวชาญ: ความช่วยเหลืออย่างมืออาชีพสำหรับการติดตั้งและการแก้ไขปัญหา.

สอบถามรายละเอียดเพิ่มเติม
  • ข้อมูลจำเพาะ
  • บริการ
  • บันทึกการติดตั้ง
  • แพ็คเกจ

OEM-spec serpentine drive belt for SINOTRUK HOWO trucks. Part number VG2600020253. Durable multi-ribbed belt for alternator, compressor, and water pump in fleet maintenance.

SINOTRUK OEM-Compatible Fan Belt – Model VG2600020253 | For HOWO A7, T7H, T5G & Mining Trucks

Ensure reliable power transmission and prevent engine overheating with this genuine-specification fan belt (หมายเลขชิ้นส่วน. VG2600020253) , engineered specifically for SINOTRUK HOWO heavy-duty trucks including A7, T7H, T5G, ST1, and mining/dump truck variants. Designed as a direct-fit replacement for original equipment, this high-strength serpentine drive belt drives critical components such as the alternator, air conditioning compressor, ปั๊มน้ำ, and power steering pump, making it one of the most essential อะไหล่ Sinotruk in daily fleet operations.

Manufactured using EPDM (Ethylene Propylene Diene Monomer) rubber with embedded polyester tension cords, this fan belt delivers superior resistance to heat, ozone, cracking, and stretching — even under extreme operating conditions found in Africa, Southeast Asia, the Middle East, and South America. Its 6-rib or 7-rib design ensures maximum grip and efficient energy transfer across multiple pulleys.

ที่ VG2600020253 is compatible with SINOTRUK WD615, MC05, MC07, and MC11 series engines, and fits seamlessly into factory routing systems without modification. It features anti-static properties to reduce electrical interference and extend alternator life.

This belt is widely used by transport companies, mining fleets, and repair workshops where downtime must be minimized and reliability is paramount.

ข้อกำหนดทางเทคนิค:

  • หมายเลขชิ้นส่วน OEM: VG2600020253
  • Belt Type: Multi-Ribbed Serpentine / V-Ribbed Belt
  • Number of Ribs: 6 หรือ 7 (depending on engine configuration)
  • Length: 2025 mm ± 5 มม (standard metric size)
  • Width: Approx. 25.4 มม (1 inch)
  • วัสดุ: EPDM Rubber + Polyester Cord Reinforcement
  • ช่วงอุณหภูมิ: -40°C to +130°C
  • Tensile Strength: 8,000 N
  • Static Conductivity: < 10⁸ Ω (anti-static compliant)
  • Compatibility Engines: WD615, MC05, MC07, MC11
  • Fitment Models: HOWO A5, A7, T5G, T7H, ST1, Dump Trucks, Cement Mixers
  • Driven Components: Alternator, ปั๊มน้ำ, AC Compressor, Power Steering Pump
  • Packaging: Individually wrapped in protective film; sealed polybag with model label

แพ็คเกจรวมถึง:
1 x Fan Belt (VG2600020253), Installation Guide (PDF available online)

Ships globally. Trusted by logistics operators in Nigeria, Kenya, Pakistan, Indonesia, UAE, and Peru.

1. เราปฏิบัติต่อลูกค้าทุกคนในฐานะเพื่อนของเรา, ยึดติดกับหลักการ: ชนะ - ชนะและผลประโยชน์ร่วมกัน ;
2. ความหลากหลายของทางเลือกสำหรับผลิตภัณฑ์: คุณภาพ, ยี่ห้อ, บรรจุภัณฑ์;
3. เราจะตอบกลับคุณสำหรับข้อสงสัยของคุณ 24 ชั่วโมง.
4.ผู้จัดจำหน่ายชิ้นส่วน Perfomance SINOTRUCK ระดับมืออาชีพ
5. เราจะให้บริการ 24/24 ชั่วโมงในวันทำงาน.
6. ASS: เราจะเสนอสิ่งที่ดีที่สุดให้กับคุณหลังจากการขายบริการ.

How to Install the VG2600020253 Fan Belt on SINOTRUK HOWO Trucks:

  1. Turn Off Engine & Disconnect Battery: Always disconnect the negative terminal before working on moving components.
  2. Inspect Old Belt Condition: Check for cracks, fraying, glazing, or rib separation — signs of wear requiring replacement.
  3. Locate Belt Routing Diagram: Refer to the engine bay label or manual for correct routing path across pulleys (alternator, AC compressor, ปั๊มน้ำ, คนขี้เกียจ).
  4. Release Tensioner Pulley: Use a 15–18mm breaker bar or tensioner tool to rotate the automatic belt tensioner and release pressure.
  5. Remove Old Fan Belt: Slide the old belt off all pulleys carefully without damaging nearby hoses or wiring.
  6. Install New Belt (VG2600020253): Route the new 6-rib or 7-rib V-ribbed belt following the diagram precisely. Ensure each rib seats fully into the pulley grooves.
  7. Engage Belt Under Tension: While holding the tensioner open, guide the last section of the belt over the final pulley (usually alternator or crankshaft).
  8. Release Tensioner Slowly: Allow the spring-loaded arm to apply proper tension automatically. Never force it.
  9. Verify Alignment & ความเครียด: Spin the belt by hand — should run straight without wobbling. Deflection should be ~8–12 mm at midpoint under finger pressure.
  10. Test Operation: Reconnect battery, start engine, and listen for squealing (indicates misalignment or low tension).

แบบฟอร์มสอบถาม (เราจะติดต่อกลับโดยเร็วที่สุด)

ชื่อ:
*
อีเมล์:
*
ข้อความ:

การยืนยัน:
3 + 3 = ?

บางทีคุณอาจจะชอบ

  • หมวดหมู่สินค้า

  • ชิ้นส่วนเครื่องยนต์ sinotruk

    ชิ้นส่วนเครื่องยนต์ sinotruk
    อะไหล่เครื่องยนต์ sinotruk howo
    ผู้ผลิตเครื่องยนต์ sinotruk
    ตัวแทนจำหน่ายเครื่องยนต์ sinotruk
    เครื่องยนต์ sinotruk a7
    เครื่องยนต์ดีเซล sinotruk
    เครื่องยนต์ sinotruk howo

  • ห้องโดยสาร sinotruk

    ห้องโดยสาร sinotruk
    ห้องโดยสาร sinotruk
    ห้องโดยสาร sinotruk howo
    ส่วน sinotruk แอฟริกาใต้
    ชิ้นส่วนเครื่องยนต์ sinotruk
    ส่วน sinotruk nz
    sinotruk สหรัฐอเมริกา

  • ส่วน sinotruk

    Jinan Sino Truck Parts เชี่ยวชาญ
    ในการส่งออกชิ้นส่วนอะไหล่รถบรรทุกชิโน
    info@sinotrukspareparts.com
    เพิ่ม:No.932 ศูนย์อะไหล่ QuanLi,Lanxiang Str. ,เทียนเฉียว Distrbut,จี่หนาน ,ประเทศจีน