ຍິນດີຕ້ອນຮັບສູ່ເວັບໄຊທ໌້ຂອງພວກເຮົາ

ຊິ້ນສ່ວນເຄື່ອງຈັກ Sinotruk

» ຊິ້ນສ່ວນເຄື່ອງຈັກ Sinotruk

Original SINOTRUK HOWO Fan Belt VG2600020253 – Heavy-Duty V-Ribbed Drive Belt for Sinotruk Spare Parts | Compatible with HOWO A7 T7H Trucks

ປະເພດແລະຮູບພາບ:
ຊິ້ນສ່ວນເຄື່ອງຈັກ Sinotruk

Why Choose Us?
Reliable Quality: Our products meet the highest industry standards.
Quick Delivery: Efficient shipping to ensure minimal downtime.
ສະຫນັບສະຫນູນຜູ້ຊ່ຽວຊານ: Professional assistance for installation and troubleshooting.

ສອບຖາມ
  • ຂໍ້ສະເພາະ
  • ການບໍລິການ
  • Installation Notes
  • ຊຸດ

OEM-spec serpentine drive belt for SINOTRUK HOWO trucks. Part number VG2600020253. Durable multi-ribbed belt for alternator, compressor, and water pump in fleet maintenance.

SINOTRUK OEM-Compatible Fan Belt – Model VG2600020253 | For HOWO A7, t7h, T5G & Mining Trucks

Ensure reliable power transmission and prevent engine overheating with this genuine-specification fan belt (ສ່ວນທີບໍ່. VG2600020253) , engineered specifically for SINOTRUK HOWO heavy-duty trucks ລວມທັງ ກ 7, t7h, T5G, ST1, and mining/dump truck variants. Designed as a direct-fit replacement for original equipment, this high-strength serpentine drive belt drives critical components such as the alternator, air conditioning compressor, ປ້ຳນ້ຳ, and power steering pump, making it one of the most essential ອາໄຫຼ່ Sinotruk in daily fleet operations.

Manufactured using EPDM (Ethylene Propylene Diene Monomer) rubber with embedded polyester tension cords, this fan belt delivers superior resistance to heat, ozone, cracking, and stretching — even under extreme operating conditions found in Africa, Southeast Asia, the Middle East, and South America. Its 6-rib or 7-rib design ensures maximum grip and efficient energy transfer across multiple pulleys.

ໄດ້ VG2600020253 is compatible with SINOTRUK WD615, MC05, MC07, and MC11 series engines, and fits seamlessly into factory routing systems without modification. It features anti-static properties to reduce electrical interference and extend alternator life.

This belt is widely used by transport companies, mining fleets, and repair workshops where downtime must be minimized and reliability is paramount.

ສະເພາະດ້ານວິຊາການ:

  • ຫມາຍເລກສ່ວນ OEM: VG2600020253
  • Belt Type: Multi-Ribbed Serpentine / V-Ribbed Belt
  • Number of Ribs: 6 or 7 (depending on engine configuration)
  • Length: 2025 mm ± 5 ມມ (standard metric size)
  • Width: Approx. 25.4 ມມ (1 inch)
  • ວັດສະດຸ: EPDM Rubber + Polyester Cord Reinforcement
  • ລະດັບອຸນຫະພູມ: -40° C ເຖິງ + 130 ° C
  • Tensile Strength: 8,000 N
  • Static Conductivity: < 10⁸ Ω (anti-static compliant)
  • Compatibility Engines: WD615, MC05, MC07, MC11
  • Fitment Models: HOWO A5, ກ 7, T5G, t7h, ST1, Dump Trucks, Cement Mixers
  • Driven Components: Alternator, ປໍ້ານໍ້າ, AC Compressor, Power Steering Pump
  • Packaging: Individually wrapped in protective film; sealed polybag with model label

Package Includes:
1 x Fan Belt (VG2600020253), Installation Guide (PDF available online)

Ships globally. Trusted by logistics operators in Nigeria, Kenya, Pakistan, Indonesia, UAE, and Peru.

1. ພວກເຮົາຮັກສາລູກຄ້າທຸກຄົນທີ່ເປັນເພື່ອນຂອງພວກເຮົາ, ຮີບຮ້ອນຕໍ່ຫຼັກການພື້ນຖານ: ເງິນຊ່ວຍເຫຼືອ WIN-WIN ແລະ MUTUAL ;
2. ລາຍລະອຽດຂອງທາງເລືອກ ສຳ ລັບຜະລິດຕະພັນ: ຄຸນນະພາບ, ຍີ່ຫໍ້, ກະເປົ.າ;
3. ພວກເຮົາຈະຕອບແທນທ່ານ ສຳ ລັບຄວາມຕ້ອງການຂອງທ່ານພາຍໃນ 24 ຊົ່ວໂມງ.
4.ຜູ້ສະ ໜອງ ຊິ້ນສ່ວນ SINOTRUCK ທີ່ເປັນມືອາຊີບ
5. ພວກເຮົາຈະຢູ່ໃນການບໍລິການ 24/24 ຊົ່ວໂມງໃນວັນເຮັດວຽກ.
6. ເອສ: ພວກເຮົາຈະສະ ເໜີ ໃຫ້ທ່ານບໍລິການຫລັງການຂາຍທີ່ດີທີ່ສຸດ.

How to Install the VG2600020253 Fan Belt on SINOTRUK HOWO Trucks:

  1. Turn Off Engine & Disconnect Battery: Always disconnect the negative terminal before working on moving components.
  2. Inspect Old Belt Condition: Check for cracks, fraying, glazing, or rib separation — signs of wear requiring replacement.
  3. Locate Belt Routing Diagram: Refer to the engine bay label or manual for correct routing path across pulleys (alternator, AC compressor, ປ້ຳນ້ຳ, ຜູ້ດອບ).
  4. Release Tensioner Pulley: Use a 15–18mm breaker bar or tensioner tool to rotate the automatic belt tensioner and release pressure.
  5. Remove Old Fan Belt: Slide the old belt off all pulleys carefully without damaging nearby hoses or wiring.
  6. Install New Belt (VG2600020253): Route the new 6-rib or 7-rib V-ribbed belt following the diagram precisely. Ensure each rib seats fully into the pulley grooves.
  7. Engage Belt Under Tension: While holding the tensioner open, guide the last section of the belt over the final pulley (usually alternator or crankshaft).
  8. Release Tensioner Slowly: Allow the spring-loaded arm to apply proper tension automatically. Never force it.
  9. Verify Alignment & Tension: Spin the belt by hand — should run straight without wobbling. Deflection should be ~8–12 mm at midpoint under finger pressure.
  10. Test Operation: Reconnect battery, start engine, and listen for squealing (indicates misalignment or low tension).

ແບບຟອມສອບຖາມ (ພວກເຮົາຈະກັບຄືນຫາທ່ານ ASAP)

ຊື່:
*
ອີເມວ:
*
ຂໍ້ຄວາມ:

ການຢັ້ງຢືນ:
2 + 5 = ?

ບາງທີເຈົ້າອາດມັກເຊັ່ນກັນ

  • ຊິ້ນສ່ວນເຄື່ອງຈັກ sinotruk

    ຊິ້ນສ່ວນເຄື່ອງຈັກ sinotruk
    ອາໄຫຼ່ເຄື່ອງຈັກ sinotruk howo
    ຜູ້ຜະລິດເຄື່ອງຈັກ sinotruk
    ຕົວແທນ ຈຳ ໜ່າຍ ເຄື່ອງຈັກ sinotruk
    ເຄື່ອງຈັກ sinotruk a7
    ເຄື່ອງຈັກກາຊວນ sinotruk
    ເຄື່ອງຈັກ sinotruk howo

  • sinotruk ຫ້ອງໂດຍສານ

    sinotruk ຫ້ອງໂດຍສານ
    sinotruk ຫ້ອງໂດຍສານ
    sinotruk howo ຫ້ອງໂດຍສານ
    ພາກສ່ວນ sinotruk ພາກໃຕ້ຂອງອາຟຣິກກາ
    ຊິ້ນສ່ວນເຄື່ອງຈັກ sinotruk
    ຊິ້ນສ່ວນ sinotruk nz
    sinotruk usa

  • ຊິ້ນສ່ວນ sinotruk

    ຊິ້ນສ່ວນລົດບັນທຸກ Jinan Sino ຊ່ຽວຊານ
    ໃນການສົ່ງອອກອາໄຫຼ່ລົດບັນທຸກສິນຄ້າ Sino
    info@sinotrukspareparts.com
    ຕື່ມ:ເລກທີ 932, ສູນ ຈຳ ໜ່າຍ ອາໄຫຼ່ QuanLi,Lanxiang Str. ,Tian Qiao Distrbut,ຈິນ ,ຈີນ