ยินดีต้อนรับสู่เว็บไซต์ของเรา

อะไหล่เครื่องยนต์ Sinotruk

» อะไหล่เครื่องยนต์ Sinotruk

Original SINOTRUK HOWO Engine Valve Seal VG1560040032 – High-Temperature Resistant Rubber Seal for Sinotruk Spare Parts

หมวดหมู่และแท็ก:
อะไหล่เครื่องยนต์ Sinotruk

ทำไมต้องเลือกเรา?
คุณภาพที่เชื่อถือได้: ผลิตภัณฑ์ของเราเป็นไปตามมาตรฐานอุตสาหกรรมสูงสุด.
จัดส่งอย่างรวดเร็ว: การจัดส่งที่มีประสิทธิภาพเพื่อให้แน่ใจว่าหยุดทำงานน้อยที่สุด.
สนับสนุนผู้เชี่ยวชาญ: ความช่วยเหลืออย่างมืออาชีพสำหรับการติดตั้งและการแก้ไขปัญหา.

สอบถามรายละเอียดเพิ่มเติม
  • ข้อมูลจำเพาะ
  • บริการ
  • บันทึกการติดตั้ง
  • แพ็คเกจ

Genuine-specification valve stem seal replacement for SINOTRUK HOWO diesel engines. Part number VG1560040032. Essential engine component in regular maintenance and overhaul kits.

SINOTRUK OEM-Compatible Engine Valve Seal – Model VG1560040032 | For HOWO Truck Diesel Engines

Ensure maximum engine efficiency and prevent excessive oil consumption with this genuine-specification valve stem seal (หมายเลขชิ้นส่วน. VG1560040032) , designed specifically for SINOTRUK HOWO trucks equipped with WD615, D10, and MC05/MC07 series engines. This critical engine spare part plays a vital role in maintaining proper lubrication balance while preventing engine oil from leaking into the combustion chamber — a common cause of blue exhaust smoke and reduced performance.

Manufactured using high-temperature resistant NBR (nitrile butadiene rubber) or optional FKM (fluoroelastomer/Viton®) material, เดอะ VG1560040032 valve seal withstands extreme heat up to 250°C, aggressive blow-by gases, and prolonged exposure to diesel fuel and oil contaminants. Its precision-molded design ensures perfect fitment on the valve guide, offering long-term sealing integrity under heavy-duty operation.

This part is widely used in Sinotruk spare parts maintenance programs, especially during mid-life engine services, injector replacements, or turbocharger repairs. It fits both intake and exhaust valves across multiple models including HOWO A7, A5, T7H, T5G, cement mixers, dump trucks, and logistics vehicles.

ข้อกำหนดทางเทคนิค:

  • หมายเลขชิ้นส่วน OEM: VG1560040032
  • Function: Valve Stem Oil Seal (Intake & Exhaust)
  • วัสดุ: High-Temp NBR or FKM (Optional)
  • Outer Diameter (OD): ~28.5 mm
  • Inner Diameter (ID): ~8.0 mm (fits standard valve stems)
  • Height: ~12.0 mm
  • ช่วงอุณหภูมิ: -40°C to +250°C
  • Compatibility Engines: SINOTRUK WD615, D10, MC05, MC07, MC11
  • Fitment Models: HOWO A5, A7, T5G, T7H, ST1, ST7
  • ใบสมัคร: Diesel Truck, Bus, Construction Equipment
  • Sealing Type: Positive Contact Lip Seal with Retaining Spring
  • Packaging: 16 pcs/set (per engine), vacuum sealed per cylinder bank

แพ็คเกจรวมถึง:
1 x Valve Seal Set (16 pcs total for full engine), Installation Guide (PDF available online)

Trusted by fleet operators in Nigeria, Kenya, South Africa, Pakistan, Bangladesh, Indonesia, and UAE. Ships globally

1. เราปฏิบัติต่อลูกค้าทุกคนในฐานะเพื่อนของเรา, ยึดติดกับหลักการ: ชนะ - ชนะและผลประโยชน์ร่วมกัน ;
2. ความหลากหลายของทางเลือกสำหรับผลิตภัณฑ์: คุณภาพ, ยี่ห้อ, บรรจุภัณฑ์;
3. เราจะตอบกลับคุณสำหรับข้อสงสัยของคุณ 24 ชั่วโมง.
4.ผู้จัดจำหน่ายชิ้นส่วน Perfomance SINOTRUCK ระดับมืออาชีพ
5. เราจะให้บริการ 24/24 ชั่วโมงในวันทำงาน.
6. ASS: เราจะเสนอสิ่งที่ดีที่สุดให้กับคุณหลังจากการขายบริการ.

How to Install the VG1560040032 Valve Seal on SINOTRUK HOWO Engines:

  1. Drain Coolant & Remove Valve Cover: Shut down engine, wait to cool, then drain coolant slightly below head level. Remove bolts and gasket from cylinder head cover.
  2. Decompress Valves: Rotate engine to TDC (Top Dead Center) and lock camshaft to prevent valve drop.
  3. Compress Valve Springs: Use a valve spring compressor tool to compress the spring and remove the keepers (collets).
  4. Remove Old Valve Seal: Carefully pull off the old rubber seal from the valve guide using pliers or tweezers. Clean carbon deposits with brake cleaner.
  5. Install New Valve Seal (VG1560040032): Slide the new high-temperature nitrile rubber or FKM (Viton®-type) seal onto the valve stem guide. Ensure it sits flush against the guide top.
  6. Reinstall Keepers & Release Spring: Reinsert collets, release compressor slowly, ensuring even seating.
  7. Repeat for All Cylinders: Replace all worn seals during engine service to prevent oil consumption.
  8. Reassemble & Test: Reinstall rocker arms, valve cover with new gasket, refill coolant, start engine, and check for blue smoke (oil burning) — indicates faulty seal installation.

แบบฟอร์มสอบถาม (เราจะติดต่อกลับโดยเร็วที่สุด)

ชื่อ:
*
อีเมล์:
*
ข้อความ:

การยืนยัน:
3 + 3 = ?

บางทีคุณอาจจะชอบ

  • หมวดหมู่สินค้า

  • ชิ้นส่วนเครื่องยนต์ sinotruk

    ชิ้นส่วนเครื่องยนต์ sinotruk
    อะไหล่เครื่องยนต์ sinotruk howo
    ผู้ผลิตเครื่องยนต์ sinotruk
    ตัวแทนจำหน่ายเครื่องยนต์ sinotruk
    เครื่องยนต์ sinotruk a7
    เครื่องยนต์ดีเซล sinotruk
    เครื่องยนต์ sinotruk howo

  • ห้องโดยสาร sinotruk

    ห้องโดยสาร sinotruk
    ห้องโดยสาร sinotruk
    ห้องโดยสาร sinotruk howo
    ส่วน sinotruk แอฟริกาใต้
    ชิ้นส่วนเครื่องยนต์ sinotruk
    ส่วน sinotruk nz
    sinotruk สหรัฐอเมริกา

  • ส่วน sinotruk

    Jinan Sino Truck Parts เชี่ยวชาญ
    ในการส่งออกชิ้นส่วนอะไหล่รถบรรทุกชิโน
    info@sinotrukspareparts.com
    เพิ่ม:No.932 ศูนย์อะไหล่ QuanLi,Lanxiang Str. ,เทียนเฉียว Distrbut,จี่หนาน ,ประเทศจีน