Sinotruk HOWO Transmission Shift Fork for Helical Gears – Syncro Type Part No. WG2214220098

1. МЫ ОТНОСИТСЯ К КАЖДОМУ КЛИЕНТУ КАК НАШ ДРУГ, ПРИГЛАШАЕМСЯ К ПРИНЦИПУ: ВЫИГРЫША И ВЗАИМНАЯ ВЫГОДА ;
2. РАЗНООБРАЗНЫЙ ВЫБОР ТОВАРОВ: КАЧЕСТВО, БРЕНД, УПАКОВКА;
3. МЫ ОТВЕТИМ ВАМ НА ЗАПРОС В 24 ЧАСЫ.
4.Профессиональный поставщик запчастей SINOTRUCK
5. МЫ БУДЕМ В ОБСЛУЖИВАНИИ 24/24 ЧАСЫ РАБОЧЕГО ДНЯ.
6. ЖОПА: МЫ ПРЕДЛАГАЕМ ВАМ ЛУЧШЕЕ ПОСЛЕПРОДАЖНОЕ ОБСЛУЖИВАНИЕ.

How to Replace the Shift Fork WG2214220098 – Technician’s Guide

1. Preparation: Lift the vehicle safely, drain transmission oil, and remove the gearbox. Work in a clean environment to prevent debris from entering the housing.
2. Access the Selector Rail: Remove the side cover and locate the 3rd/4th gear selector rail. Use a punch to drive out the retaining pin or bolt securing the old fork.
3. Remove Old Fork: Slide the worn fork off the selector rod. Inspect for cracks, groove deformation, or excessive play — common after prolonged high-torque use.
4. Install New Fork (WG2214220098): Align the new forged steel fork onto the rod, ensuring full contact with the synchronizer sleeve. The fork legs must move freely without binding.
5. Secure & Torque: Reinstall the mounting bolt and tighten to 20–22 Nm. Do not exceed — risk of thread failure is high on aluminum housings.
6. Test Before Final Assembly: Manually slide the rail back and forth. Movement should be smooth, with no grinding or resistance.
7. Rebuild & Refill: Reinstall transmission, reconnect linkages, and refill with GL-5 80W-90 gear oil. Test shift quality at low RPM before full operation.