Sinotruk HOWO Transmission Shift Fork for Helical Gears & Synchro Assembly – WG2214220072

1. МЫ ОТНОСИТСЯ К КАЖДОМУ КЛИЕНТУ КАК НАШ ДРУГ, ПРИГЛАШАЕМСЯ К ПРИНЦИПУ: ВЫИГРЫША И ВЗАИМНАЯ ВЫГОДА ;
2. РАЗНООБРАЗНЫЙ ВЫБОР ТОВАРОВ: КАЧЕСТВО, БРЕНД, УПАКОВКА;
3. МЫ ОТВЕТИМ ВАМ НА ЗАПРОС В 24 ЧАСЫ.
4.Профессиональный поставщик запчастей SINOTRUCK
5. МЫ БУДЕМ В ОБСЛУЖИВАНИИ 24/24 ЧАСЫ РАБОЧЕГО ДНЯ.
6. ЖОПА: МЫ ПРЕДЛАГАЕМ ВАМ ЛУЧШЕЕ ПОСЛЕПРОДАЖНОЕ ОБСЛУЖИВАНИЕ.

How to Install the Sinotruk HOWO Shift Fork (WG2214220072) – Technician Tips

1. Pre-Work Check: Disconnect battery ground, drain transmission oil, and safely remove gearbox. Clean all external surfaces before disassembly.
2. Selector Rod Access: Remove the shift rail plug and extract the selector rod. Take note of fork orientation — this model engages with the 3rd/4th gear synchro sleeve.
3. Fork Removal: Loosen retaining bolt and slide off old fork. Inspect for groove wear or bending — common failure signs include grinding noises during shifts.
4. New Fork Fitment: Slide new WG2214220072 fork onto the selector rod. Ensure legs align precisely with the synchronizer hub; there should be no lateral play.
5. Torque & Reassembly: Tighten mounting bolt to 20 Nm ± 2 Nm. Over-tightening may crack the fork base. Reinstall rail and test movement by hand before closing case.
6. Final Test: Refill with recommended GL-5 80W-90 gear oil. Perform neutral-to-gear cycling manually if possible. Start engine only after full reassembly.