High-Performance Engine Oil Pump VG1500070048 – OEM Replacement for HOWO Trucks
Ensure maximum engine longevity and lubrication efficiency with the original Heavy-Duty HOWO Engine Oil Pump (Part No.: VG1500070048) — precision-engineered for CNHTC’s WD615 series engines used in HOWO A7, HOWO 371HP/380HP, and Steyr-based commercial trucks.
المواصفات الفنية
| Feature |
Specification |
| رقم القطعة |
VG1500070048 |
| نماذج متوافقة |
HOWO A7, HOWO 380HP, HOWO 371HP |
| Engine Type |
WD615.69, WD615.47, Steyr-based diesel engines |
| تطبيق |
Engine Lubrication System |
| اكتب |
Gear-Type Internal Oil Pump |
| مادة |
High-Strength Cast Iron + Alloy Steel Gears |
| Output Pressure |
4.5–6.0 Bar (at 1500 دورة في الدقيقة) |
| معدل التدفق |
Approx. 120 L/min |
| Mounting Position |
Front Engine, Behind Timing Gear |
| Drive Mechanism |
Driven by Crankshaft via Intermediate Gear |
| Rotation Direction |
Clockwise |
| ضمان |
1 عام |
| Origin |
جينان, الصين (Sinotruk OEM Network) |
| Packaging |
Export Carton + Protective Foam + Wooden Case |
| موك |
1 Unit (Samples Available) |
| Payment Options |
تي / ت, خطاب الاعتماد, PayPal, الاتحاد الغربي |
| موعد التسليم |
2–5 Days (Air), 15–25 Days (Sea) |
1. نتعامل مع كل عميل كصديق لنا, التمسك بالمبدأ: مربح للجانبين ومزايا متبادلة ;
2. مجموعة متنوعة من الخيارات للمنتجات: جودة, الماركة, التعبئة والتغليف;
3. سنقوم بالرد عليك لاستفسارك في 24 ساعات.
4.المورد المهنية أجزاء ساينو تراك برفومانس
5. سنكون في الخدمة 24/24 ساعات في يوم العمل.
6. الحمار: سوف نقدم لك أفضل خدمة بعد البيع.
Installation Instructions
How to Install the HOWO Engine Oil Pump VG1500070048
Preparation:
Disconnect battery. Drain engine oil completely.
Remove front timing cover to access oil pump assembly.
Remove Old Pump:
Unbolt mounting screws securing the old oil pump.
Carefully pull out the pump; inspect pickup tube and screen for debris.
Inspect & Clean:
Clean oil pan and suction screen thoroughly.
Check gear drive alignment and crankshaft splines.
Install New Pump (VG1500070048):
Apply light coating of clean engine oil to gears and shaft.
Align drive gear with crankshaft and insert pump straight.
Secure with mounting bolts; torque to 20–25 Nm evenly.
Reassemble & Refill:
Reinstall timing cover with new gasket/sealant.
Refill engine with recommended viscosity oil (على سبيل المثال, 15W-40).
Prime oil system manually if possible before startup.
Test Run:
Start engine and monitor oil pressure gauge.
Ensure pressure reaches normal range within 5 seconds.
Check for leaks around mounting area.
