High-Performance Engine Oil Pump VG1500070048 – OEM Replacement for HOWO Trucks
Ensure maximum engine longevity and lubrication efficiency with the original Heavy-Duty HOWO Engine Oil Pump (ພາກສ່ວນທີ.: VG1500070048) — precision-engineered for CNHTC’s WD615 series engines used in HOWO A7, HOWO 371HP/380HP, and Steyr-based commercial trucks.
ສະເພາະດ້ານວິຊາການ
| Feature |
Specification |
| ເລກສ່ວນ |
VG1500070048 |
| ແບບທີ່ເຂົ້າກັນໄດ້ |
HOWO A7, HOWO 380HP, HOWO 371HP |
| Engine Type |
WD615.69, WD615.47, Steyr-based diesel engines |
| ໃບສະ ໝັກ |
Engine Lubrication System |
| ປະເພດ |
Gear-Type Internal Oil Pump |
| ວັດສະດຸ |
High-Strength Cast Iron + Alloy Steel Gears |
| Output Pressure |
4.5–6.0 Bar (at 1500 rpm) |
| Flow Rate |
Approx. 120 L/min |
| Mounting Position |
Front Engine, Behind Timing Gear |
| Drive Mechanism |
Driven by Crankshaft via Intermediate Gear |
| Rotation Direction |
Clockwise |
| ຮັບປະກັນ |
1 ປີ |
| Origin |
ຈິນ, ຈີນ (Sinotruk OEM Network) |
| ການຫຸ້ມຫໍ່ທີ່ໃຫຢ່ |
Export Carton + Protective Foam + Wooden Case |
| ມ. ສ |
1 Unit (Samples Available) |
| Payment Options |
ທ / ທ, L / C, PayPal, Western Union |
| ເວລາສົ່ງສິນຄ້າ |
2–5 Days (Air), 15–25 Days (Sea) |
1. ພວກເຮົາຮັກສາລູກຄ້າທຸກຄົນທີ່ເປັນເພື່ອນຂອງພວກເຮົາ, ຮີບຮ້ອນຕໍ່ຫຼັກການພື້ນຖານ: ເງິນຊ່ວຍເຫຼືອ WIN-WIN ແລະ MUTUAL ;
2. ລາຍລະອຽດຂອງທາງເລືອກ ສຳ ລັບຜະລິດຕະພັນ: ຄຸນນະພາບ, ຍີ່ຫໍ້, ກະເປົ.າ;
3. ພວກເຮົາຈະຕອບແທນທ່ານ ສຳ ລັບຄວາມຕ້ອງການຂອງທ່ານພາຍໃນ 24 ຊົ່ວໂມງ.
4.ຜູ້ສະ ໜອງ ຊິ້ນສ່ວນ SINOTRUCK ທີ່ເປັນມືອາຊີບ
5. ພວກເຮົາຈະຢູ່ໃນການບໍລິການ 24/24 ຊົ່ວໂມງໃນວັນເຮັດວຽກ.
6. ເອສ: ພວກເຮົາຈະສະ ເໜີ ໃຫ້ທ່ານບໍລິການຫລັງການຂາຍທີ່ດີທີ່ສຸດ.
Installation Instructions
How to Install the HOWO Engine Oil Pump VG1500070048
Preparation:
Disconnect battery. Drain engine oil completely.
Remove front timing cover to access oil pump assembly.
Remove Old Pump:
Unbolt mounting screws securing the old oil pump.
Carefully pull out the pump; inspect pickup tube and screen for debris.
Inspect & Clean:
Clean oil pan and suction screen thoroughly.
Check gear drive alignment and crankshaft splines.
Install New Pump (VG1500070048):
Apply light coating of clean engine oil to gears and shaft.
Align drive gear with crankshaft and insert pump straight.
Secure with mounting bolts; torque to 20–25 Nm evenly.
Reassemble & Refill:
Reinstall timing cover with new gasket/sealant.
Refill engine with recommended viscosity oil (e.g., 15W-40).
Prime oil system manually if possible before startup.
Test Run:
Start engine and monitor oil pressure gauge.
Ensure pressure reaches normal range within 5 seconds.
Check for leaks around mounting area.
