High-Performance Engine Oil Pump VG1500070048 – OEM Replacement for HOWO Trucks
Ensure maximum engine longevity and lubrication efficiency with the original Heavy-Duty HOWO Engine Oil Pump (Part No.: VG1500070048) — precision-engineered for CNHTC’s WD615 series engines used in HOWO A7, HOWO 371HP/380HP, and Steyr-based commercial trucks.
Thông số kỹ thuật
| Tính năng |
Đặc điểm kỹ thuật |
| Số phần |
VG1500070048 |
| Các mô hình tương thích |
HOWO A7, HOWO 380HP, HOWO 371HP |
| Engine Type |
WD615.69, WD615.47, Steyr-based diesel engines |
| Ứng dụng |
Engine Lubrication System |
| Kiểu |
Gear-Type Internal Oil Pump |
| Vật liệu |
High-Strength Cast Iron + Alloy Steel Gears |
| Output Pressure |
4.5–6.0 Bar (at 1500 vòng / phút) |
| Tốc độ dòng chảy |
Approx. 120 L/min |
| Mounting Position |
Front Engine, Behind Timing Gear |
| Drive Mechanism |
Driven by Crankshaft via Intermediate Gear |
| Rotation Direction |
Clockwise |
| Sự bảo đảm |
1 Năm |
| Origin |
Tế Nam, Trung Quốc (Sinotruk OEM Network) |
| Bao bì |
Export Carton + Protective Foam + Wooden Case |
| MOQ |
1 Unit (Samples Available) |
| Payment Options |
T / T, L / C, PayPal, Western Union |
| Thời gian giao hàng |
2–5 Days (Air), 15–25 Days (Sea) |
1. CHÚNG TÔI ĐỐI XỬ VỚI MỌI KHÁCH HÀNG LÀ BẠN CỦA CHÚNG TÔI, BẤM VÀO NGUYÊN TẮC: CHIẾN THẮNG VÀ LỢI ÍCH THƯƠNG MẠI ;
2. NHIỀU SỰ LỰA CHỌN CHO SẢN PHẨM: CHẤT LƯỢNG, NHÃN HIỆU, BAO BÌ;
3. CHÚNG TÔI SẼ TRẢ LỜI BẠN CHO YÊU CẦU CỦA BẠN 24 GIỜ.
4.Nhà cung cấp phụ tùng Perfomance SINOTRUCK chuyên nghiệp
5. CHÚNG TÔI SẼ PHỤC VỤ 24/24 GIỜ TRONG NGÀY LÀM VIỆC.
6. ASS: CHÚNG TÔI SẼ CUNG CẤP CHO BẠN DỊCH VỤ SAU BÁN HÀNG TỐT NHẤT.
Installation Instructions
How to Install the HOWO Engine Oil Pump VG1500070048
Preparation:
Disconnect battery. Drain engine oil completely.
Remove front timing cover to access oil pump assembly.
Remove Old Pump:
Unbolt mounting screws securing the old oil pump.
Carefully pull out the pump; inspect pickup tube and screen for debris.
Inspect & Clean:
Clean oil pan and suction screen thoroughly.
Check gear drive alignment and crankshaft splines.
Install New Pump (VG1500070048):
Apply light coating of clean engine oil to gears and shaft.
Align drive gear with crankshaft and insert pump straight.
Secure with mounting bolts; torque to 20–25 Nm evenly.
Reassemble & Refill:
Reinstall timing cover with new gasket/sealant.
Refill engine with recommended viscosity oil (e.g., 15W-40).
Prime oil system manually if possible before startup.
Test Run:
Start engine and monitor oil pressure gauge.
Ensure pressure reaches normal range within 5 seconds.
Check for leaks around mounting area.
