Le WG9981340034 Brake Chamber Bracket is specifically designed for the right side of the rear axle on Sinotruk HOWO series trucks. Its primary function is to provide a rigid, vibration-free mounting platform for the air brake chamber, ensuring that braking force is applied consistently and without mechanical deflection.
Spécifications techniques
| Numéro de pièce OEM |
WG9981340034 |
| Application |
Sinotruk HOWO, Howo T7H, HOWO TX |
| Position |
Rear Axle, Right Hand Side (RHS) |
| Matériel |
Heavy-Duty Reinforced Forged Steel |
| Traitement de surface |
Anti-corrosive Industrial Coating |
| Compatibilité |
Standard Air Brake Systems |
1. NOUS TRAITONS CHAQUE CLIENT COMME NOTRE AMI, ADHÉREZ AU PRINCIPE: AVANTAGE GAGNANT ET MUTUEL ;
2. UNE VARIÉTÉ DE CHOIX DE PRODUITS: QUALITÉ, MARQUE, EMBALLAGE;
3. NOUS VOUS RÉPONDRE À VOTRE DEMANDE EN 24 HEURES.
4.Fournisseur de pièces SINOTRUCK de performance professionnelle
5. NOUS SERONS EN SERVICE 24/24 HEURES DE LA JOURNÉE DE TRAVAIL.
6. CUL: NOUS VOUS OFFRIRONS LE MEILLEUR SERVICE APRÈS-VENTE.
Replacing a brake chamber bracket is a critical task. For fleet uptime and safety, we recommend following these professional steps:
-
Préparation: Secure the vehicle on a level surface. Release the spring brakes (manually if necessary) and support the axle with jack stands.
-
Suppression: Disconnect the air lines from the brake chamber and remove the chamber from the old bracket. Inspect the bolts connecting the bracket to the axle housing—these often require a high-torque impact wrench due to road grime and rust.
-
Clean and Inspect: Once the old bracket is removed, clean the mounting surface on the axle housing. Check for any hairline cracks in the axle flange itself.
-
Fitment: Align the WG9981340034 support. It should seat flush against the mounting surface without forced prying.
-
Torque Specifications: Use new high-strength bolts (Grade 10.9). Tighten to the manufacturer-specified torque (refer to your HOWO service manual) to prevent loosening from road vibration.
-
Reassembly: Re-mount the brake chamber and reconnect the air lines. Perform a leak test and verify that the pushrod moves freely within the bracket’s clearance.
