Selamat datang di website kami

Bagian Sasis Sinotruk

» Bagian Sasis Sinotruk

Sinotruk Sitrak G7S Right Fender Mounting Bracket (Bagian No. AZ16D423000286)

KATEGORI DAN TAG:
Bagian Sasis Sinotruk

Mengapa Memilih Kami?
Kualitas yang dapat diandalkan: Produk kami memenuhi standar industri tertinggi.
Pengiriman cepat: Pengiriman yang efisien untuk memastikan waktu henti minimal.
Dukungan ahli: Bantuan profesional untuk pemasangan dan pemecahan masalah.

penyelidikan
  • Spesifikasi
  • Layanan
  • installation guide for AZ16D423000286
  • Paket

Sinotruk Sitrak G7S Right Fender Mounting Bracket (Bagian No. AZ16D423000286)

Premium OEM Sinotruk Sitrak G7S Right Fender Mounting Bracket (AZ16D423000286)

Spesifikasi Teknis ‌:

kesesuaian: Designed for Sinotruk Sitrak G7S series heavy trucks
‌Material‌: High-strength steel with anti-corrosion coating
‌Weight‌: 2.4kg
‌Installation‌: Bolt-on replacement part for damaged fender assemblies
‌Certification‌: Original Qinren spare parts quality standard

 

1. KAMI MEMPERLAKUKAN SETIAP PELANGGAN SEBAGAI TEMAN KAMI, TETAP PADA PRINSIP: MENANG-MENANG DAN MANFAAT BERSAMA ;
2. BERBAGAI PILIHAN PRODUK: KUALITAS, MEREK, PENGEMASAN;
3. KAMI AKAN MEMBALAS ANDA ATAS PERTANYAAN ANDA DI 24 JAM.
4.Pemasok suku cadang SINOTRUCK Kinerja Profesional
5. KAMI AKAN MELAYANI 24/24 JAM PADA HARI KERJA.
6. PANTAT: KAMI AKAN MENAWARKAN LAYANAN SETELAH PENJUALAN YANG TERBAIK.

Preparation

  • Required Tools‌:

    • Torque wrench (recommended torque range: 20–50 N·m)
    • 13mm and 16mm sockets
    • Anti-seize lubricant (for bolts and threads)
    • Clean cloth and degreaser
  • Safety Precautions‌:

    • Ensure the vehicle is parked on a flat surface with brakes engaged.
    • Disconnect the battery to avoid electrical hazards.

Installation Steps

  1. Remove the Damaged Bracket‌:

    • Use a 13mm socket to loosen and remove the ‌four bolts‌ securing the old bracket to the fender and chassis.
    • Carefully detach any connected wiring harnesses (if applicable) and set aside.
  2. Prepare the Mounting Surface‌:

    • Clean the chassis and fender contact points with degreaser to remove dirt and rust residues.
    • Apply a thin layer of anti-seize lubricant to the bolt threads.
  3. Install the New Bracket‌:

    • Align the AZ16D423000286 bracket precisely with pre-drilled holes on the chassis and fender.
    • Secure using the original bolts (or provided replacements) and tighten sequentially in a cross pattern.
    • Final torque: ‌28–32 N·m‌ (refer to Sinotruk chassis assembly specifications).
  4. Reconnect Components‌:

    • Reattach any wiring harnesses or auxiliary parts removed earlier.
    • Verify bracket alignment by gently closing/opening the fender panel.

Post-Installation Checks

  • Perform a visual inspection for gaps or misalignment between the bracket and fender.
  • Test fender stability by applying light manual pressure.
  • Reconnect the battery and conduct a short test drive to confirm no abnormal vibrations

Formulir Pertanyaan (kami akan menghubungi Anda secepatnya)

Nama:
*
Surel:
*
Pesan:

Verifikasi:
4 + 9 = ?

Mungkin Anda juga suka

  • suku cadang mesin sinotruk

    suku cadang mesin sinotruk
    suku cadang mesin sinotruk howo
    produsen mesin sinotruk
    dealer mesin sinotruk
    mesin sinotruk a7
    mesin diesel sinotruk
    mesin sinotruk howo

  • kabin sinotruk

    kabin sinotruk
    kabin sinotruk
    kabin sinotruk howo
    bagian sinotruk afrika selatan
    suku cadang mesin sinotruk
    sinotruk bagian nz
    sinotruk usa

  • bagian sinotruk

    Bagian truk Jinan Sino mengkhususkan diri
    dalam mengekspor suku cadang truk Sino
    info@sinotrukspareparts.com
    Menambahkan:No. 932, pusat suku cadang QuanLi,Lanxiang Str. ,Distrbut Tian Qiao,Jinan ,Cina