ຍິນດີຕ້ອນຮັບສູ່ເວັບໄຊທ໌້ຂອງພວກເຮົາ

ຊິ້ນສ່ວນ Sinotruk Chassis

» ຊິ້ນສ່ວນ Sinotruk Chassis

Sinotruk Sitrak G7S Right Fender Mounting Bracket (ສ່ວນທີບໍ່. AZ16D423000286)

ປະເພດແລະຮູບພາບ:
ຊິ້ນສ່ວນ Sinotruk Chassis

Why Choose Us?
Reliable Quality: Our products meet the highest industry standards.
Quick Delivery: Efficient shipping to ensure minimal downtime.
ສະຫນັບສະຫນູນຜູ້ຊ່ຽວຊານ: Professional assistance for installation and troubleshooting.

ສອບຖາມ
  • ຂໍ້ສະເພາະ
  • ການບໍລິການ
  • installation guide for AZ16D423000286
  • ຊຸດ

Sinotruk Sitrak G7S Right Fender Mounting Bracket (ສ່ວນທີບໍ່. AZ16D423000286)

Premium OEM Sinotruk Sitrak G7S Right Fender Mounting Bracket (AZ16D423000286)

‌Technical Specifications‌:

‌Compatibility‌: Designed for Sinotruk Sitrak G7S series heavy trucks
‌Material‌: High-strength steel with anti-corrosion coating
‌Weight‌: 2.4ກິ​ໂລກ​ຣາມ
‌Installation‌: Bolt-on replacement part for damaged fender assemblies
‌Certification‌: Original Qinren spare parts quality standard

 

1. ພວກເຮົາຮັກສາລູກຄ້າທຸກຄົນທີ່ເປັນເພື່ອນຂອງພວກເຮົາ, ຮີບຮ້ອນຕໍ່ຫຼັກການພື້ນຖານ: ເງິນຊ່ວຍເຫຼືອ WIN-WIN ແລະ MUTUAL ;
2. ລາຍລະອຽດຂອງທາງເລືອກ ສຳ ລັບຜະລິດຕະພັນ: ຄຸນນະພາບ, ຍີ່ຫໍ້, ກະເປົ.າ;
3. ພວກເຮົາຈະຕອບແທນທ່ານ ສຳ ລັບຄວາມຕ້ອງການຂອງທ່ານພາຍໃນ 24 ຊົ່ວໂມງ.
4.ຜູ້ສະ ໜອງ ຊິ້ນສ່ວນ SINOTRUCK ທີ່ເປັນມືອາຊີບ
5. ພວກເຮົາຈະຢູ່ໃນການບໍລິການ 24/24 ຊົ່ວໂມງໃນວັນເຮັດວຽກ.
6. ເອສ: ພວກເຮົາຈະສະ ເໜີ ໃຫ້ທ່ານບໍລິການຫລັງການຂາຍທີ່ດີທີ່ສຸດ.

Preparation

  • Required Tools‌:

    • Torque wrench (recommended torque range: 20–50 N·m)
    • 13mm and 16mm sockets
    • Anti-seize lubricant (for bolts and threads)
    • Clean cloth and degreaser
  • Safety Precautions‌:

    • Ensure the vehicle is parked on a flat surface with brakes engaged.
    • Disconnect the battery to avoid electrical hazards.

Installation Steps

  1. Remove the Damaged Bracket‌:

    • Use a 13mm socket to loosen and remove the ‌four bolts‌ securing the old bracket to the fender and chassis.
    • Carefully detach any connected wiring harnesses (if applicable) and set aside.
  2. Prepare the Mounting Surface‌:

    • Clean the chassis and fender contact points with degreaser to remove dirt and rust residues.
    • Apply a thin layer of anti-seize lubricant to the bolt threads.
  3. Install the New Bracket‌:

    • Align the AZ16D423000286 bracket precisely with pre-drilled holes on the chassis and fender.
    • Secure using the original bolts (or provided replacements) and tighten sequentially in a cross pattern.
    • Final torque: ‌28–32 N·m‌ (refer to Sinotruk chassis assembly specifications).
  4. Reconnect Components‌:

    • Reattach any wiring harnesses or auxiliary parts removed earlier.
    • Verify bracket alignment by gently closing/opening the fender panel.

Post-Installation Checks

  • Perform a visual inspection for gaps or misalignment between the bracket and fender.
  • Test fender stability by applying light manual pressure.
  • Reconnect the battery and conduct a short test drive to confirm no abnormal vibrations

ແບບຟອມສອບຖາມ (ພວກເຮົາຈະກັບຄືນຫາທ່ານ ASAP)

ຊື່:
*
ອີເມວ:
*
ຂໍ້ຄວາມ:

ການຢັ້ງຢືນ:
5 + 4 = ?

ບາງທີເຈົ້າອາດມັກເຊັ່ນກັນ

  • ຊິ້ນສ່ວນເຄື່ອງຈັກ sinotruk

    ຊິ້ນສ່ວນເຄື່ອງຈັກ sinotruk
    ອາໄຫຼ່ເຄື່ອງຈັກ sinotruk howo
    ຜູ້ຜະລິດເຄື່ອງຈັກ sinotruk
    ຕົວແທນ ຈຳ ໜ່າຍ ເຄື່ອງຈັກ sinotruk
    ເຄື່ອງຈັກ sinotruk a7
    ເຄື່ອງຈັກກາຊວນ sinotruk
    ເຄື່ອງຈັກ sinotruk howo

  • sinotruk ຫ້ອງໂດຍສານ

    sinotruk ຫ້ອງໂດຍສານ
    sinotruk ຫ້ອງໂດຍສານ
    sinotruk howo ຫ້ອງໂດຍສານ
    ພາກສ່ວນ sinotruk ພາກໃຕ້ຂອງອາຟຣິກກາ
    ຊິ້ນສ່ວນເຄື່ອງຈັກ sinotruk
    ຊິ້ນສ່ວນ sinotruk nz
    sinotruk usa

  • ຊິ້ນສ່ວນ sinotruk

    ຊິ້ນສ່ວນລົດບັນທຸກ Jinan Sino ຊ່ຽວຊານ
    ໃນການສົ່ງອອກອາໄຫຼ່ລົດບັນທຸກສິນຄ້າ Sino
    info@sinotrukspareparts.com
    ຕື່ມ:ເລກທີ 932, ສູນ ຈຳ ໜ່າຍ ອາໄຫຼ່ QuanLi,Lanxiang Str. ,Tian Qiao Distrbut,ຈິນ ,ຈີນ